All

Driven Racing Oil Driven Speed Lube 8 Ounce Aerosol Spray Can $8.99

DRIVEN Speed Lube BULK PRICING: Buy three or more bottles and save $.50/bottle! Powerful penetrating and foaming lubricant that works its way into tight surfaces to lubricate hard-to-reach areas. Driven Speed Lube borrows technology from Driven's race proven, championship winning oils to provide a spray lubricant that is perfect for exposed roller bearings, heim joints, linkages as well as chains and sprockets. These types of parts are often neglected and left dirty without any lubrication to protect them from metal to metal wear. Speed Lube allows you to quickly service these items by simply spraying them down. The special formula includes additives that penetrate, lubricate and protect. Driven Speed Lube is perfect for all types of racing including: go-carts, mini sprints, quarter midgets, motorcycles, UTVs, ATVs and purpose built chassis cars and trucks. Speed Lube provides extended protection with it's powerful foaming lubricant that penetrates hard to reach tight surfaces!

Molecule Molecule Matte Helmet Detailer $8.95

Molecule Matte Helmet Detailer Molecule Matte Helmet Detailer cleans and details matte ﬁnish helmets in one easy step. Speciﬁcally formulated to keep the low luster of matte helmets intact and maintain a uniform flat finish. Cleans and details matte finish helmets in one easy step Safely removes bugs, oils, dirt and grime Apply and allow to dry

Molecule Molecule Visor Cleaner and Rain Repel 4oz $8.95

Molecule Visor Cleaner and Rain Repel MOLECULE VISOR CLEANER safely cleans helmet exterior visors while improving visibility in wet weather. Easy to apply formula, also repels rain and other liquids from sticking to the visor. For use on visors, goggles and wind screens. Safely remove bugs, oils, dirt & grime from visor in one easy step Water quickly beads & clears to improve wet weather visibility Can be applied to helmet visors, goggles & wind screens

Molecule Molecule Helmet Refresh 4oz $8.95

Molecule Helmet Refresh MOLECULE HELMET REFRESH is a lightly scented spray specifically formulated to deodorize interior of helmets. Cosmetic-grade formula containing benzalkonium chloride (BKC) sanitizing ingredient, HELMET REFRESH keeps the interior padding, foam and helmet lining clear of odors. Cleans & deodorizes helmet linings Proprietary Pico12 odor eliminating technology Cosmetic grade, skin-friendly and sanitizing ingredients Includes FDA compliant antimicrobial – BKC

Molecule Molecule Cleaner Polish 4oz $8.95

Molecule Cleaner Polish MOLECULE CLEANER POLISH is designed to keep exterior of helmets clean, shiny and protected in a simple application. Safe to use on visors and gloss finishes, simply spray and wipe off. Cleans and polishes helmets, visors in easy application Safely removes bugs, oils, dirt & grime Recommended for use on all gloss finishes

Molecule Molecule Anti-Fog 4oz $8.95

Molecule Anti-Fog MOLECULE ANTI-FOG improves visibility and is designed specifically to inhibit fog causing moisture on the interior of shields. Apply to the inside surface of visors, goggles or wind screens to guard against distortion. Cleans and polishes helmets, visors in easy application Safely removes bugs, oils, dirt & grime Recommended for use on all gloss finishes Reduces fogging & improves visibility Cleans surface of dirt & chemicals Recommended for helmet visors, goggles and wind screens Caution: Not for use with Stilo visor.

Thunderhill Thunderhill Raceway Logo Keychain $4.00

Thunderhill Raceway Park Keychain Never lose the keys to the race car again with this 3D rubber die-cut keychain featuring the iconic Thunderhill Raceway Park logo. Size: 65mm x 18mm x 4mm (WxHxD) Makes a great gift for the racing enthusiast in your life!

Thunderhill Thunderhill Raceway Logo Sticker 4" $4.00

Thunderhill Raceway Park Stickers This 4" (100mm) die-cut sticker features the Thunderhill Raceway Park official logo. Makes a great gift for the racing enthusiast in your life! Thunderhill Raceway Logo Sticker Details: Die-cut vinyl Four-inch long logo decal

Competition Motorsport CMS Master "OFF" Decal $2.99

CMS Master "OFF" Decal Our CMS Master "OFF" Decal meets the standards of NASA, SCCA and IMSA for the "international marking of a spark in a blue triangle" to mark your vehicle's kill switch location. 3.375" by 2" wide Die-cut vinyl decal

Competition Motorsport CMS Fire Extinguisher Decal $2.99

CMS Fire Extinguisher Decal Our CMS Fire Extinguisher Decal meets the standards of NASA, SCCA and IMSA for marking your fire system actuator location. 3" diameter Die-cut vinyl decal

Competition Motorsport CMS Tow Decal $2.99

CMS Tow Decal All professional sanctioning bodies require tow hooks on race cars if the roll cage is not easily accessible, and the tow hooks must be clearly marked for quick identification by safety crews. 3" by 2" Die-cut vinyl decal

Add to cart

Competition Motorsport CMS Transponder Decal $2.99

CMS Transponder Decal with Write-On Area Some sanctioning bodies require this decal to mark the location of your transponder. Our 3 inch diameter red-on-white "T" decal has a special area for you to write in your transponder number, if desired. Just write your transponder number using a ball point pen or Sharpie and you're good to go. Make sure the ink is waterproof if the decal will be exposed to the elements. If in doubt, we suggest you protect the write-on area with clear tape to keep the transponder number from smearing or washing away. 3" diameter Die-cut vinyl decal

Chillout Systems Chillout Systems Quantum Cooling Package $0.00

Chillout Systems Complete Quantum Cooling Kit This Thunderhill-exclusive kit contains everything required for a complete installation of the amazing Chillout Systems Quantum driver cooling system. Optional equipment is also available. KIT INCLUDES: Chillout Systems Quantum Cooler Power Cable Mounting Tray (choose steel or carbon fiber) Chilllout Club Series cooling shirt Chillout Systems Coolant Formula - 1.5 Liter Chillout Systems 6-Foot Insulated Coolant Hose 40-Amp Inline Fuse (install within 6 inches of power source) OPTIONAL UPGRADES: Quantum Pro Cooler (see details below) 10-Foot Insulated Coolant Hose Insulated Y-Hose for driver/co-driver cooling Upgrade to Pro Touring SFI shirt Air Duct Plenum (increases air flow & cooling capacity): Use in conjunction w/ NACA duct and hose MUST SELECT ONE: Dual Prong Connector or Rapid Release Connector (Rapid Release includes roll bar and flush mounts, easy push-on connection, emergency pull release) Wired remote control Second Vehicle Kit (includes mounting tray, wiring harness, fuse and relay) What makes the Chillout Systems Quantum Cooler superior to other driver cooling systems? Complete control coolant temperature, not just the flow of cold liquid. Bright, easy-to-read digital display on the cooler or control via a mountable remote control unit. Requires 25% less space to mount, fits nearly any vehicle! Say goodbye to the hassle and weight of ice and water; Chillout System weighs far less than any competing system. A 1.5 liter coolant pack lasts most drivers an entire season! With our Second Vehicle Kit, your cooler can be hot-swapped to another car in under two minutes Quantum Pro vs Quantum V3: The Quantum Pro offers several additional features versus the Quantum V3, including: Full color LCD display with extensive data. Internal bypass valve that eliminates the need for a coolant loop. System continues to cool the reservoir even when the shirt is disconnected. Dual 4-inch 220 cfm brushless fans. 50% larger condenser vs V3. 25% larger evaporator vs V3. LiPo / Li-ion battery support outlet at 24 volts. Supports parallel power at 12 and 24 volts simultaneously, no downtime between power sources. Coolant reservoir has double the capacity at 13 oz. Eco mode maintains system under 18 Amps at all times. Carbon Fiber mounting plate, further reducing weight and heat-soak. Two flow sensors monitor both sides of the flow valves for easy troubleshooting and maintenance. IP65 rating.

Sabelt GT-Spine Pad Set: NO PRICE SOLD ONLY WITH SEAT $0.00

Sabelt GT-Spine Racing Seat Pad Set PAD SET ONLY One of the many great things about the Sabelt GT-Spine Racing Seat is the ability to install customized pad kits. This lets you tailor the look and fit of your Sabelt GT-Spine to your individual needs by utilizing different size pads. Choose between Medium, Large or Extra Large pads to get a great-fitting and great-looking racing seat! One pad kit weighs about 3.5 lbs (1.7 kg). This is the pad set only. Sabelt GT-Spine Racing Seat sold separately.

Add to cart

AiM Sports INTERNAL: AiM Solo 2 & Solo 2 DL RPM and Power Wiring Harness $0.00

AiM Solo 2 & Solo 2 DL Vehicle Power Wiring Harness Now you can power your AiM Solo 2 and Solo 2 DL for your entire endurance race without the need to charge the battery. The power cable that comes with the AiM Solo 2 in the package is set up for a cigarette lighter connection, but this is a hard wire connection for true race cars. This harness connects your AiM Solo 2 to your vehicle's fuse box wiring. One end has a 5-pin 712 (screw-in) connector to fit the Solo, and the other has 2 non-terminated wires (Power and Ground). AiM Solo 2 & Solo 2 DL Vehicle Power Wiring Harness Details: Manufacturer: Aim Manufacturer part number: V02589020 Fits Solo DL: No Fits Solo 2 DL: Yes Fits Solo Base Model: No Fits Solo 2 Base Model: Yes Pins on AiM Solo Side: 5 Pin Thread on connector Vehicle Chassis Ends: 2 Non terminated wires Vehicle Chassis Ends Break Out: Power, and Ground If you are putting a Solo2 into an older vehicle and need a direct to battery/fuse box power supply cable, use this harness for an easy install.

AiM Sports INTERNAL: AiM Solo 2 DL to OBD-II Connector (new Solo 2 DL) $0.00

AiM CAN 7-Pin to OBD-II (K-Line Connector) Cable for Solo 2 DL AiM Solo 2 DL to OBD-II Port Connection Cable On Your Car For Easy Addition of RPM and other vehicle data. One end has the K-Line (OBD-2) plug to fit the diagnostic port, and the other end has a 7-pin 712 (screw-in) connector for the Solo 2 DL. OBD-II is also known as K-Line This is the same cable supplied with the original AiM Solo 2 DL for OBD-II. Does not fit the original Solo DL. AiM CAN 7-Pin to OBD-II (K-Line Connector) Cable for Solo 2 DL Details: Manufacturer: AiM Manufacturer part number: V02589040 End 1: AiM 7 Pin 712 (thread on) End 2: OBD-2 (K-Line) Fits AiM Solo: No Fits AiM Solo DL: No Fits AiM Solo 2: No Fits AiM Solo 2 DL: Yes

Find anything you need

Sign Up and Save