Racing Helmet Accessories

Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air Kit Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are four small ventilation holes molded into the top of every ST5 helmet. Stilo's Top Air system fits over the forward two holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the rear holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air System can be fitted to all Stilo ST5 model helmets. It comes in two sizes to best fit your helmet: YA0834 Non-Adjustable for helmets XS 54cm to L 59cm YA0857 Non-Adjustable for helmets L+ 60cm to 4XL 64cm

Sparco Air & Sky Replacement Shields The Sparco visor shields for the Air Pro and Sky helmets are constructed from strong, lightweight polycarbonate which provide distortion-free vision. The shields are available in dark smoke, silver iridium and blue iridium which enhance your vision during bright sunlight conditions. Clear replacement shields are also available. These sheilds will fit the Prime RF-9W, Sky RF-7W and Air Pro RF-5w full face helmets.

Stilo Visor for the ST5 and ST5.1 Racing Helmet Colorful Anti-Fog/Anti-Scratch Visor Shields for Your Stilo Helmet These Stilo visors are a great way to add some color to your racing life! Stilo offers a wide variety of visor options including many popular iridium colors. All Stilo visors have an anti-fog and anti-scratch coating and are made for a perfect fit on your Stilo ST5 or ST5.1 helmet (both the GT and N "naked" versions)1. A Note on Cleaning Anti-Fog/Anti-Scratch Visors Anti-fog visors require special care, only use Stilo Visor Cleaner (Acrysol). Do not use Windex or glass cleaner containing ammonia as this can harm the anti-scratch coating on the outside of the visor and the anti-fog coating on the inside. 1 Stilo helmet not included.

Stilo ST5 Helmet Visor FIA8860-2018 ABP Compatible only with Stilo ST5 FIA 8860-2018 ABP helmets. Stilo offers a wide variety of visor color and tint options, covering all racing conditions, for the Stilo ST5 FIA 8860-2018 ABP helmets. These visors all have an anti-fog and anti-scratch coating1, and are made to fit your Stilo ST5 ABP helmet perfectly. Since 2019, the most stringent FIA 8860-2018-ABP (Advanced Ballistic Protection) helmet standard has been in effect for Formula 1. This latest standard builds frontal penetration protection into the helmet shell. The new FIA standard drove Stilo engineers to design and develop the Stilo ST5 FIA8860-2018ABP, along with this new shield design. While looking very similar to the standard Stilo ST5 visor, there is a slight shape difference. (The Zylon strip used prior to the FIA 8860-2019 ABP standard is available for use on other Stilo ST5 helmets. It must be purchased with a new ST5 visor and built by Stilo. It can not be installed by the end user.) Stilo ST5 Visor FIA8860-2018 ABP Details: Manufacturer: Stilo Qty in kit: one (1) visor Visor stocking bag included: Yes Fits Stilo ST5 FIA8860-2018 ABP helmets: Yes Fits any other Stilo helmet: No ABP is an Acronym for Advanced Ballistic Protection in the latest FIA F1 standard Stilo ST5 Visor FIA8860-2018ABP Part Number List: YA0800ABP Clear YA0801ABP Smoked Medium YA0802ABP Smoked Dark YA0803ABP Silver Mirror Medium YA0804ABP Silver Mirror Dark YA0805ABP Iridium Blue Medium YA0806ABP Iridium Blue Dark YA0807ABP Iridium Red Medium YA0808ABP Iridium Red Dark 1 Anti-fog/anti-scratch visors require special care. Only use Stilo Visor Cleaner (Acrysol). Do not use Windex or other glass cleaner containing ammonia as this can harm the anti-scratch coating on the outside of the visor and the anti-fog coating on the inside.

Bell Racing Helmets SE077 3mm Mirrored Helmet Shield Bell SE077 helmet shields are specifically designed for the Bell HP77 helmet. The SE077 is a 3mm, injection-molded, optically correct polycarbonate face shield with a Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE077 shield uses the Bell SV (SE07, SE077) pivot kit. It is compatible with tear offs and is available in a variety of tint colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) Bell SE077 Helmet Shield Tint Options: Silver Mirror Gold Mirror Blue Mirror Red Mirror Rainbow Iridium Mirror

Stilo Short Sun Visor For ST5 & ST5.1 Helmets This short sun visor for Stilo helmets fits all models of Stilo ST5 helmet, including the latest SA2020 ST5.1 helmets. This visor cannot be used in conjunction with a standard Stilo shield and instead will replace the standard shield. Stilo ST5.1 GT Composite helmet (shown) is sold separately.

Schuberth SP1 Visor 3MM THICK VISOR 3D INJECTED Schuberth 3mm visor derived directly from their F1 expertise. Twelve different visor shades are available from transparent to dark with several mirrored and multi-layer coating options. All standard visors are compatible with the Pinlock 120 fog resistant lens, and clear tear-off buttons are installed. Each visor comes with a soft visor pouch to protect visors when not in use. AVAILABLE COLORS: Light Smoked Blue Dark Smoked Blue Light Smoked Red Dark Smoked Red Light Tint Dark Tint Light Mirrored Silver Dark Mirrored Silver Clear Clear

Bell Racing Helmets SE06 3mm Helmet Shield Bell SE06 helmet shields are specifically designed for the SA2020 Bell HP6 and GT6 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.)

Bell Racing Helmets SE07 3mm Helmet Shield Bell SE07 helmet shields are specifically designed for all Bell RS7 and Bell HP7 helmets. The SE07 is a 3mm, injection-molded, optically correct polycarbonate face shield with a Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE07 shield uses the Bell SV (SE07, SE077) pivot kit. It is compatible with tear offs and is available in a variety of tint colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) Bell SE07 Helmet Shield Tint Options: Clear Light Smoke Dark Smoke Amber Hi-Def Silver Mirror Blue Mirror Rainbow Iridium Mirror Multi-Layer Red Multi-Layer Blue Multi-Layer Green Multi-Layer Gold Multi-Layer Yellow Multi-Layer Purple Smoke Multi-Layer Purple Clear

Bell SE03 Helmet Shields Bell SE03 Double Screen Anti-Fog (DSAF) helmet shields are specifically designed for the SA2015 Bell GP.3 and GTX.3 helmets (including carbon fiber models), and the SA2010 Bell HP3 Carbon Helmet. The Double Screen Anti-Fog treatment features variable thickness that exceeds 5mm in the field of vision for excellent clarity and fog-control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) Bell SE03 Shield Tints & Colors: Clear Amber Yellow Light Smoke Dark Smoke Blue Chrome Silver Chrome Gold Chrome Red Chrome Rainbow Mirror Multilayer Red Multilayer Blue Multilayer Green

Bell SRV-8 Replacement Helmet Shields Functional and Beautiful Tinted, Mirrored, or Amber Hi-Def The Bell SRV-8 is a 3mm injection-molded, optically correct polycarbonate face shield. The SRV-8 3mm shield uses the SRV-1 pivot kit (not included), is compatible with tear offs, and comes in a variety of tint colors and mirror finishes. You can order your SRV-8 shield with a Double Screen Anti Fog (DSAF) insert to greatly improve fog control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts (tear-offs sold separately). Bell SRV-8 Helmet Shield Tints and Finishes: Blue Mirror Silver Mirror Light Smoke Dark Smoke Amber Hi-Def Clear Bell SRV-8 Shields Fit the Following Helmets: Bell Racing M8 Bell Racing M8 Carbon Bell Racing BR8 Bell Racing BR8 Carbon

Arai GP-5W Replacement Shields Replacement shields for the Arai GP-5W auto racing helmet.

Arai GP-7 Anti-Fog Helmet Shields Available in a variety of colors and tints, these replacement shields fit all versions of the Arai GP-7 SA2020 helmet.

HJC AR-10 III and HX-10 III Replacement Shields Polycarbonate injection molded construction for superior visibility and durability. Hard coated anti-fog interior. Pre-installed tear off posts. Available in Dark Blue, Chrome, Amber, Dark Smoke, and Clear.

Stilo Helmet Skirt Stilo 2 layer nomex fitted helmet skirt. Fire retardant fitted helmet skirt can be used to help prevent dust and debris from coming inside the helmet. Its design keeps the skirt tight to the helmet without the use of Velcro and helps eliminate dust, smoke or flames from entering the helmet. Fits any ST5 full face helmet. SFI 3.3 approved! Features a cutout for Eject Helmet Removal tube

Trac-Com Helmet Speaker Kit V2 This helmet kit is designed for drivers looking to add integrated speakers and a microphone to their helmet. Designed in-house by RaceCom to be a universal solution, the Helmet Kit V2 is compatible with most motorsport helmets regardless the size and shape. The Instructor Helmet Kit includes the V2 Helmet Kit with an IMSA male cable end.What makes the V2 kit different? The new V2 helmet kit takes lessons learned from the V2 Student headset and applies them to bring you the loudest, most complete, highest quality universal helmet kit available. This kit features the brand new R7 digital mic and powerfully tuned speakers all built into a compact package that will easily install to almost any helmet quickly and comfortably. FEATURES: Two powerfully tuned speakers New R7 digital microphone Male IMSA plug on headset Strong, sturdy RaceCom cables have been pull-tested by a certified lab Meticulous build process proven to outlast and outperform all others INCLUDES: Helmet Speaker Kit V2