Racing Helmets

Sparco Air Pro RF-5W Auto Racing Helmet The current Sparco auto racing helmet line is a result of over 40 years of research and development experience, including wind tunnel testing and work with some of history's great racing teams. Sparco's latest Air Pro RF-5W helmet lineup was designed specifically to meet the requirements of the Snell SA2020 and FIA 8859-2015 ratings. Sparco has introduced several innovations for driver safety and comfort. All shells now have layers of carbon-kevlar for increased strength without added weight. The helmets have been wind-tunnel tested to optimize exterior vent placement and air flow. And new EPS interiors and padding were redesigned for increased airflow and driver comfort. Sparco also introduced a new Medium/Large helmet size taking advantage of their smaller, lighter, more compact shell. Check out Sparco Air Pro RF-5W helmet shields here. Sparco Air Pro RF-5W Auto Racing Helmet Details: Manufacturer: Sparco Manufacturer part no.: 003375 Snell SA2020 and FIA 8859-2015 approved Lightweight carbon-kevlar/fiberglass construction Wind tunnel optimized venting with anti-fog air channels New "Medium/Large" size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Pre-molded interior accepts drink tubes and intercom system (sold separately) Sparco Air Pro RF-5W Helmet Colors & Sizes: 54cm (X-Small) to 62cm (XX-Large) Gloss White or Matte Black The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Arai Auto Racing GP-5W SA2020 Helmet The Arai GP-5W SA2020 helmet is perfect for stock car, sedan, and rally drivers. The GP-5W is a favorite because of its tall 90mm (~3.5”) top-to-bottom eye port. The GP-5W uses its own exclusive shield with this larger opening. The Arai GP-5W is Snell SA2020 certified with M6 washer/nuts installed at the factory. Drivers of any experience level will be able to easily install their Head and Neck Restraint system anchor posts (sold separately). The Arai Auto Racing GP-5W SA2020 also comes with the FIA-8859-2015 certification sticker found on the shell’s interior lining. Arai Advanced Technology ScLc Helmet Shell The Arai GP-5W Helmet is built with Arai's exclusive, very-lightweight ScLc (Super Complex Laminate Construction) shell technology. This ensures a low overall weight to offset the added weight of the helmet’s larger shield. Innovative GP-5W Racing Helmet Shell Shape The Arai Auto Racing GP-5W helmet SA2020 helps reduce fatigue for the driver due to its more natural head shape, smaller shell size, and lower center of gravity to assist with balance and stability. Interior Fit of the Arai GP-5W The Arai Auto Racing GP-5W Helmet SA2020 is designed to closely match the shape of the human head, allowing for a snug, yet comfortable, fit. Arai has developed this “natural” shape over more than 50 years of helmet design research and refinement. Taller Eye Port for Increased On-Track Vision Sedan drivers will appreciate the larger 90mm eye port, top to bottom. A visor peak is available for drivers not needing a shield on the The Arai Auto Racing GP-5W Helmet SA2020. ARAI GP-5W Removeable/Replaceable Cheek Padding Low maintenance, easy-to-clean cheek pads are removable, washable, and replaceable with pads of varying thickness to provide a snug, safe fit. Threaded for M6 HANS Anchors The FIA-8859-2015 certified GP-5W helmet has M6 threaded washer/nuts with 6mm threads pre-installed. This convenient feature lets the driver use the anchor system that works best with their Head and Neck Restraint. The anchor posts are made to rest flush on the helmet surface, accepting a variety of HNR anchor systems. Extraordinary Air Flow and Ventilation Closed-cockpit drivers need greater airflow when racing. The upper ventilation system of the GP-5W SA2020 helmet incorporates two exhaust vents and two large intake ducts to help keep the driver cool and comfortable. Multiple Shields Available for the Arai GP-5W A variety of shields for the Arai GP-5W are available here. Arai anti-fog shields come in clear, light tint and dark smoke. Standard shields also come in clear, light tint and dark smoke. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship to you with signature required for delivery.

HJC H10 Carbon Fiber SA2020 Auto Racing Helmet The HJC H10 Carbon Fiber SA2020 helmet is ideal for use in all types of auto racing. From the dusty ovals of Tennessee to the starting line at Pomona, its comfortable fire-resistant, moisture-wicking Comfort-Carbon interior and Advanced Ventilation System keep you cool and comfortable. The HJC H10 Carbon is an affordable alternative to more expensive carbon fiber helmets without sacrificing fit, feel or safety. HJC H10 Carbon Fiber SA2020 Auto Racing Helmet Details: Snell SA2020 approved Weight (Large): 3.2 lbs (1.45 kg) Carbon fiber composite weave shell is extremely light weight Superior fit and comfort using advanced CAD technology ACS (Advanced Channeling System) provides front-to-back airflow flushing heat and humidity up and out Optional shields available: Amber, Dark Smoke, Dark Blue, Black Chrome Optional clear spoiler is available Polycarbonate anti-fog shield with tear-off posts Pre-installed M6 terminals for head and neck restraints Improved front ventilation Double D-ring retention system Additional shields for the HJC H10 Carbon Fiber helmet are available here. HJC H10 Carbon Fiber Sizing Chart: SIZE CENTIMETERS HAT SIZE INCHES XS 54-55 6 3/4 – 6 7/8 21 1/4 – 21 5/8 S5 56-57 7 – 7 1/8 M 58-59 7 1/4 – 7 3/8 22 7/8 – 23 1/4 L 60-61 7 1/2 – 7 5/8 23 5/8 – 24 XL 62-63 7 3/4 – 7 7/8 24 3/8 – 24 3/4 XXL 64-65 8 – 8 1/8 25 1/4 – 25 5/8

Bell Racing Helmets GTX.3 SA2020 Composite With its refined, aerodynamic design and lightweight carbon composite shell, the Bell Racing Helmets GTX.3 Composite SA2020 helmet provides the best performance and pro features for open wheel, open compartment, karting, formula and dirt track racers. This Bell GTX.3 Composite SA2020 has an integrated shield and dual screen anti-fog (DSAF) visor with rear-facing vents which are ideal for these forms of racing, allowing for air exchange and unobstructed vision without worrying about dust and dirt. Bell Racing GTX.3 Auto Racing Helmet Features Snell SA2020 and FIA 8859-2015 homologation Includes clear SE03 3mm DSAF shield (SV SE03/05 pivot system) with DSAF anti-fog insert Sleek aero styling with integrated wing Front chin bar Gurney ("duckbill") improves high-speed aerodynamic performance Venturi airflow system lets fresh air in, hollow synthetic rubber gasket seal keeps dirt, water and dust out High-strength, lightweight carbon-composite construction using new high-pressure molding system Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection Ultra-plush grey Comfort-Max FR® interior fabric wicks away moisture Install integrated drinking tube and radio microphone systems with the integrated face piece channels Multi-density foam interior and contoured cheek pads offer a professional fit Standard-sized eye port M6 terminal hardware and hex wrench for Head and Neck Restraint devices Additional visor shields for the Bell Racing GTX.3 available here.

Bell Racing Helmets GT6 Pro Composite SA2020 The Bell Racing GT6 Pro auto racing helmet features the same modern and aggressive design as HP6, developed for racers in closed-car environments and featuring a wide eyeport for extended vision with a lightweight Premium carbon glass shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional ear cups providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately). Bell GT6 Pro Auto Racing Helmet Features Lightweight premium carbon/fiberglass composite shell FIA 8859-2015 and Snell SA2020 homologated Wide eye port for excellent vision in closed-cockpit cars Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Integrated channels in face piece offer multiple options to install drink tube and radio systems Extraction vents maximize cooling and air circulation Factory-installed HANS anchors Optional top forced-air intake can be installed on the left or right top side vents for use with an external cooling system Optional ear cups increase noise insulation Interior: Dark Grey high-strength, high comfort FR fabric Additional Bell Racing GT6 Pro Helmet Visors Are Available Here Bell GT6 Pro Auto Racing Helmet Colors The Bell GT6 Pro is availabile in your choice of Gloss White or Matte Black. Bell GT6 Pro Auto Racing Helmet Sizes Available in Sizes: 54cm (6-3/4) to 61cm+ (7-5/8) What Comes in the Bell GT6 Pro Helmet Box? Bell Racing GT6 Pro SA2020 composite auto helmet Clear SE06 3mm DSAF shield (installed) Drawstring Bell helmet pouch Plastic tear-off posts (installed) Hex wrench key

Bell Racing Helmets GP.3 Sport SA2020 Composite The Bell Helmets GP.3 Sport combines traditional Formula 1 styling with a versatile air intake system, a Double Screen Anti-Fog (DSAF) visor shield, and a lightweight carbon composite shell. With its leading-edge aerodynamic performance, the Bell GP.3 Sport is great option for open-wheel racers and kart racers who demand professional features, high performance and exceptional comfort. The GP3 Sport gives you maximum ventilation and a clear view even in the toughest track conditions. Bell GP.3 Sport Auto Racing Helmet Details: Manufacturer: Bell Racing Helmets Manufacturer part no.: 1417A Lightweight composite shell Snell SA2020 and FIA 8859-2015 approved Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Versatile ventilation system featuring chin bar ventilation and upper air intakes Vents can be open or closed Front chin spoiler for improved aerodynamic performance Compatible with Bell’s rear spoilers, top gurney, and chin bar gurneys for enhanced stability at high speeds Integrated interior channels for drink tube and radio systems M6 terminals for FHR anchor attachment Synthetic rubber gasket seal to prevent dirt and water entering the helmet Shield and pivot kit: SE03, SV(SE03/SE05) Additional shields for the Bell GP.3 Sport are available here. Bell GP.3 Sport Auto Racing Helmet Colors & Sizes Colors: Gloss White, Matte Black Sizes: Small, Medium, Large, X-Large

Bell Racing BR8 Helmet SA2020 Designed for dirt track and other forms of off-road racing, the versatile Bell Racing BR8 can be used in multiple configurations including standard, left- or right-side forced air, left- or right-3/4 top forced air, or top forced air. Bell has developed an innovative system (the kit is included with the helmet) so racers can customize the BR8 to adapt to different forms of racing and seat configurations, providing the ultimate flexibility in one auto racing helmet model. The Bell Racing BR8 features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive visor seal that prevents shield fogging, and rear-facing venturi airflow vents to prevent dust from entering the helmet while still allowing forced air to flow in. The Bell Racing BR8 features a unique air chamber system that evenly distributes airflow around the head regardless of the top air configuration used. The helmet can be used with or without ear cups. Bell BR8 Auto Racing Helmet Colors & Sizes The Bell Racing BR8 composite helmet comes in Gloss White and Matte Black in the following sizes: 57-58cm 58-59cm 60cm 61cm+ Bell BR8 SA2020 Auto Racing Helmet Details: Manufacturer: Bell Racing Helmets Manufacturer part no.: 1436A Construction: Lightweight composite shell Homologation: Snell SA2020 Safety Technology: Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Comfort Technology: Integrated channels in face piece offer multiple options to install drink tube and radio system Aero: +Includes front duckbill to enhance aerodynamic performance Ventilation: Comes standard with rear facing vents that create a Venturi effect allowing air to exchange and circulate in the helmet white preventing dust and dirt from entering Interior: Black high-strength/high-comfort FR® Fabric Forced air kits available for quick lock (V10) and Maglock systems M6 HANS terminals pre-installed Additional Bell Racing BR8 Visor Shields Available Here.

Bell Racing MAG-10 PRO Helmet Introducing the MAG-10 PRO, a symbol of sophistication in the world of racing helmets. Crafted for those who seek a blend of modern aesthetics and high performance, this open-face helmet is tailored specifically for racetrack use. With its lightweight carbon-glass composite shell, it promises not only durability but also a feather-light feel. The adjustable peak, paired with a newly integrated adjustable sunscreen, ensures you're shielded from both glare and debris. Prioritizing comfort, the MAG-10 PRO offers a snug professional fit, making it the preferred choice for racers who demand a premium open-face helmet for circuit racing. Bell MAG-Pro Helmet Features & Options: Design & Material: Open-face design with a lightweight Premium carbon-glass composite shell. Safety & Impact Protection: Advanced multi-density, multi-piece liner ensures maximum energy absorption. Sun Protection: Adjustable sun peak and integrated anti-scratch dark smoked sunscreen (M10S-Short). Comfort: Removable cheek pads crafted from advanced multi-density materials. Additional Features: Factory-installed Hans anchors, a variety of adjustable sunscreens in different colors and lengths, and a sleek white finish. Sizes & Certifications: Available in sizes ranging from 54 to 61+. Certified with FIA8859-2015 & SNELL SA2020 standards. For racers who refuse to compromise on style, comfort, or safety, the MAG-10 PRO stands out as the ultimate helmet for circuit use. In The Box of Your Bell MAG-Pro Helmet MAG-10 PRO M10S-Short HP Helmet Bag Hans Anchors Installed

Bell Racing Star Classic Vintage Helmet Famous Bell Star design as worn by famous F1 drivers in the seventies. Fast-forwars 50-odd years and Bell is again launching this iconic helmet to the dilight of true classic car enthusiasts and historic car drivers. The same shape as the famous original Bell Helmets are reintroduced but produced to the last safety standard (FIA 8859/SNELL SA2020) using the latest production techniques and high tech materials and featured in our special Bell Heritage White color with a gloss finish. Features and Design Fiberglass composite shell Advanced one-density, single-piece liner to maximize energy absorption and impact performance M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Interior: Tan High Strength – High Comfort FR Fabric Shield and pivot kit: Clear Star Classic Smoked shield available as an accessory Color: Bell Heritage White Sizes: S-M-L-XL Homologation: FIA8859-2015 & SNELL SA2020 For racers who refuse to compromise on style, comfort, or safety, the Bell Star Classic Helmet stands out as the ultimate helmet for circuit use.

Bell Europe 500 TX Open Face Helmet New release of the 500 TX helmet Designed in accordance with current FIA and Snell standards Interior made of fire-resistant material Removable sun-peak fitted HANS clips are NOT included Features and Design Colour: Heritage White Material: fiberglass Homologation: FIA 8859-2015 Snell SA2020

Bell Racing Helmets K1 Pro SA2020 The Bell Racing Helmets K1 Pro composite auto racing helmet is a multi-use, full-featured helmet with superior ventilation, aero styling and Bell's aggressive chin bar design and front chin Gurney (duckbill). The K1 Pro is a great helmet for open wheel racers, closed car racers and kart racers who demand superior features including light weight, excellent fit, and multiple ventilation options. The Bell Racing Helmets K1 Pro can be used in an open wheel configuration with air intake (included), or in a closed car configuration with the top forced air insert (sold separately). Bell Racing Helmets K1 Pro Colors/Graphics: Solid colors: Gloss White, Matte Black Graphics colors: Circuit Blue, Circuit Red Additional shields for the Bell K1 Pro auto racing helmet are available here. Bell Helmets K1 Pro Auto Racing Helmet Details: Manufacturer: Bell Racing Helmets Manufacturer part no.: 1420A Snell SA2020 homologated Aggressive Bell aerodynamic styling Lightweight composite shell Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection Integrated interior channels radio mic systems Black Comfort Plus FR® interior fabric for durable performance Multi-density foam interior padding for superior fit Excellent ventilation system includes direct-flow chin bar vents, a 2mm air intake vent, and 10 intake and extraction vents  Top forced-air option available Hollow synthetic rubber gasket seals out water, dust, and dirt Standard-size eye port Shield: 287 3mm SRV clear shield (SRV-1 pivot system) M6 hardware ready for HANS posts

Bell Racing Helmets M.8 SA2020 Composite The Bell Racing M.8 Composite SA2020 auto racing helmet succeeds the Bell M-Series concept, ideal for racers who want a larger field of vision (perfect for eyeglass wearers) along with the latest Bell performance and styling. The Bell M.8 Composite racing helmet has traditional styling while offering a wide range of updated features for all types of racing: open wheel, closed car, karting, and more. The lightweight composite shell of the Bell M.8, Comfort-Plus FR® interior, manual air intake vents, and bigger eye opening all contribute to superior protection, comfort, and air flow to keep you safe and cool under pressure. Additional shields for the Bell M.8 SA2020 auto racing helmet are available here. Bell Racing Helmets M.8 Available Colors: Gloss White Matte Black Bell Racing Helmets M.8 SA2020 Details: Manufacturer: Bell Racing Helmets Manufacturer part no.: 1419A Snell SA2020 homologation SRV-8 3mm SRV clear shield (SRV-1 pivot system) Lightweight composite shell with high-pressure molding system for improved shell strength High-impact, multi-piece, multi-density custom bead absorbing liner improves low- and high-velocity impact protection Install integrated radio microphone, drinking tube systems (both sold separately) with integrated interior channels Black Comfort-Plus FR® interior fabric for excellent moisture wicking and durability Multi-density foam interior for superior fit Optimum airflow system with chin bar vents, air intake vents Air, dirt, and water won’t get past the hollow synthetic rubber gasket seal Larger eye port than most helmets M6 terminal hardware for HANS posts

HJC H70 Auto Racing Helmet Whether you're navigating the sand dunes of Baja or on the bank turns of the Nürburgring, HJC Motorsports has you covered with its most versatile helmet to date: the all-new H70. Designed with a straightforward approach, the H70 is at home in nearly any driving conditions with the help of a few key attachments already in the box: a rear spoiler for open-cockpit driving and a top forced-air kit for vehicles outfitted with filtered air systems. Complete with factory installed M6 terminals for your favorite head and neck restraint, the HJC H70 will have you ready to take on your favorite race track anywhere in the world. Available in either Gloss White or Semi-Flat Black, in sizes ranging from X-Small to XX-Large. HJC H70 Top Air Auto Racing Helmet Details: Snell SA2020 and FIA 8859-2015 approved Advanced fiberglass composite shell, two shell sizes (X-Small to Medium, and Large to XX-Large) Advanced air circulation system: two front intakes and eight top vents Fire resistant moisture-wicking removable and washable cheek pads and head liner Polycarbonate anti-fog shield with tear-off posts Double D-ring retention system Pre-installed M6 terminals for head and neck restraints Optional shields available: Amber, Dark Smoke, Dark Blue, Fire Red, and Black Chrome Sizes: X-Small to XX-Large Additional shields for the HJC H70 are available here HJC H70 Top Air Helmet Included Accessories: Vent plugs (8 pcs) Lower vent cover Top forced-air attachment Rear spoiler attachment

Bell K1 Sport Auto Racing Helmet The Bell K1 Sport SA2020 is a race-ready, full-featured auto racing helmet combining superior ventilation with modern styling. The Bell K1Sport is built for the entry-level racer demanding high quality at an affordable price. Incorporating a lightweight composite shell, excellent fit, and multiple ventilation options, the Bell K1 Sport is a perfect choice for racers on a budget and track-day enthusiasts just entering the sport. Additional shields for the Bell K1 Sport racing helmet are available here. Bell K1 Sport Auto Racing Helmet Details: Shell colors: Gloss White, Metallic Black, Titanium Silver Snell SA2020 approved Lightweight composite shell Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Versatile ventilation system featuring chin bar ventilation and upper air intake vents Air intake, rear spoiler, top gurney, and chin bar gurneys available Forced air attachments available for use with external cooling systems M6 terminals for FHR anchor attachment Synthetic rubber gasket seal prevents dirt and water from entering Shield and pivot kit: 287 SRV, SRV-1 Sizes: 54cm to 61+cm

Bell MAG Rally Helmet The Bell MAG Rally Helmet is an entry level open-face helmet in a modern design. Bell Helmets’ “Serious Head Protection” allied with ZeroNoise® high quality and powerful communication system at very affordable price, never seen before! Featuring a fiberglass shell, an adjustable peak fitted with antiglare sunscreen and a fantastic communication system, the MAG RALLY is the perfect helmet for rally drivers and co-drivers wanting an entry level and very affordable open face helmet. Thanks to its ZeroNoise® electronics, high power speakers and noise cancelling microphone, the MAG RALLY simply sets new standards in its category. Bell MAG Rally Helmet Features: Manufacturer: Bell Racing Helmets Manufacturer part no.: 1435A Homologation: FIA8859-2015 approved Open face helmet featuring fiberglass composite shell Adjustable sun peak with antiglare sunscreen ZeroNoise® electronics, high power speakers, and efficient noise-cancelling microphone mounted on high-quality flex boom Straight cable coming out of the helmet, terminated in an ultra-reliable heavy duty in-molded female Nexus connector (compatible with other brands of amplifiers) Color: Metallic Titanium Silver Sizes: Small, Medium, Large, X-Large

HJC H10 SA2020 Auto Racing Helmet The HJC H10 SA2020 Helmet is the ideal helmet for all types of racing. HJC H10 has a comfortable Fire Resistant Moisture-wicking Comfort-Carbon interior and Advanced Ventilation System to keep you cool and comfortable. The HJC H10 SA2020 Helmet is the best, most affordable alternative. Additional shields for the HJC H10 helmet are available here HJC H10 SA2020 Auto Racing Helmet Details: Snell SA2020 approved Advanced Fiberglass Composite Weave shell provides light weight, superior fit and comfort using advanced CAD technology ACS Advanced Channeling System: front-to-back airflow flushes heat and humidity up and out Optional shields available: Amber, Dark Smoke, Dark Blue, and Black Chrome Optional clear spoiler is available Anti-fog shield with tear-off posts Pre-installed M6 terminals for head and neck restraints Improved front ventilation Sizes X-Small to XX-Large HJC Helmet Sizing Chart: Helmet Size cm Hat Size Inches X-Small 54-55 6 3/4 – 6 7/8 21 1/4 – 21 5/8 Small 56-57 7 – 7 1/8 22 – 22 1/2 Medium 58-59 7 1/4 – 7 3/8 22 7/8 – 23 1/4 Large 60-61 7 1/2 – 7 5/8 23 5/8 – 24 X-Large 62-63 7 3/4 – 7 7/8 24 3/8 – 24 3/4 XX-Large 64-65 8 – 8 1/8 25 1/4 – 25 5/8