Molecule
Molecule Helmet Care Kit
$29.95
Molecule Helmet Care Kit
This specially-bundled kit from Thunderhill makes it easy and safe to keep your racing helmet in top condition, clean and fresh. The light-duty Cleaner & Polish spray is designed to keep your helmet exterior shell clean, shiny and protected. Safe to use on all finishes, including flat and matte. Refresher spray keeps the inside of your helmet clean, while Anti-Fog helps to keep the inside of your visor clear. Rain Repel is excellent at keeping the outside of your visor clear and making it easy to clean off debris, bugs, etc.
KIT INCLUDES:
(1) Helmet CLEANER & POLISH 4 oz.
(1) Helmet REFRESHER 4 oz.
(1) Helmet RAIN REPEL 4 oz.
(1) Helmet ANTI-FOG 4 oz.
Molecule
Molecule Speed Cleaner-Detailer Kit 16 oz.
$24.95
Bundled kit of one Molecule Race Car Cleaner 16 oz. spray bottle and one Molecule Race Car Detailer 16 oz. spray bottle. This heavy-duty cleaner and fine detailer are designed to keep all parts of your race car and equipment clean. Formuated with a light-duty cleaner/polish designed to keep surfaces looking clean, shiny and protected.
FEATURES:
Easy to use, just spray on and wipe off
Non-streaking formula
Reduces dirt, grime and grease surface build up
Safely removes rubber scuff marks, bugs, oils, dirt and heavy grime
Non-toxic, non-corrosive, biodegradable and pH balanced
Molecule
Molecule Spray-On Race Car Cleaner
from $19.95
Molecule Heavy Duty Cleaner is designed to keep all parts of your race vehicle and equipment clean. Safe to use on all finishes, including paint, powder coat, and plastics, whether flat, matte, or glossy.
FEATURES:
Safely removes rubber scuff marks, bugs, oil, dirt and heavy grime
Non-toxic formula
Non-corrosive, biodegradable and pH balanced
Easy to use: just spray it on & wipe it off
Non-streaking formula
Molecule
Molecule Race Car Detailing Spray 16 oz.
$12.95
Molecule Race Car Detail Spray is a light duty cleaner & polish in one spray, designed to keep surfaces looking clean, shiny and protected. Safe to use on all finishes, including paint, powder coat, plastics, vinyl, including flat, matte, and gloss.
FEATURES:
Safely removes light rubber scuffmarks, bugs, oils, dirt and grime
Reactive siloxane attaches to surface to polish without a slimy feel
Reduces dirt, grime and grease build up
Cleans & polishes in one easy step
Just spray on & wipe off
Non-streaking formula
Performance Friction
PFC Brake Pads 7767.01.17.44
$318.95
PFC 01 COMPOUND
The Performance Friction PFC 01 compound is the standard by which all racing brake pads are judged. The PFC 01 has a very high initial bite and torque, with very little temperature-induced torque rise. At the end of braking, less torque scatter exists for improved modulation and excellent release.
With its low-wear characteristics and excellent disc conditioning properties, it's no wonder the PFC 01 compound has won more World and National Championships than any other brake pad on the market!
COMMON CALIPER FITMENTS:
Manufacturer:
Model:
AP Racing
CP2279
 
CP3620
 
CP3720
 
CP3788, CP3789
 
CP4890
 
CP5000
 
CP5835
 
CP5880
AP Racing (Essex)
SC250
 
SC430
Performance Friction
PFC Brake Pads 7745.01.16.44
$241.95
PFC 01 COMPOUND
The Performance Friction PFC 01 compound is the standard by which all other racing brake pads are judged. The PFC 01 has a very high initial bite and torque, with very little temperature-induced torque rise. At the end of braking, less torque scatter exists for improved modulation and excellent release.
With its low-wear characteristics and excellent disc conditioning properties, it's no wonder the PFC 01 compound has won more World and National Championships than any other brake pad on the market!
COMMON CALIPER FITMENTS:
Manufacturer:
Model:
Alcon
H-Type
AP Racing
CP4567
CP5040-10/11/12/13S4
CP5100
CP5108
CP6760
Girodisc
D1-119 Girodisc Front Replacement Rotor Rings
$950.00
REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT.Thunderhill is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Girodisc
A1-119 Girodisc 2pc Front Brake Rotors (Aventador)
$1,900.00
Thunderhill is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
Fits Lamborghini Aventador
The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and Thunderhill RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Girodisc
D2-025 Girodisc Rear Replacement Rotor Rings
$570.00
REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT.
Thunderhill is an authorized dealer for GiroDisc products. As one of the largest stocking dealers in the country, we ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc two-piece hat and rotor and no modifications are necessary.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling.
FITS: MERCEDES BENZ C63 AMG (2008-2011), CLK63 AMG Black Series (08), E55 AMG (03-06), CLS55 AMG (05-06), E63 AMG (07-14), SL55 AMG (03-08), CLS63 AMG (07-11)
Sold/Priced per pair.
Race Technologies
Race Technologies RE10 Brake Pad - 2282.17.RE10
$549.00
RT RE10:
RE10 is the ultimate endurance race compound offering a balance of excellent stopping power, low thermal conductivity, extremely low pad and disc wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments.
Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms
RACE-ONLY PAD
Running a "racing use only" pad on the street could produce excessive noise and dust.
Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range.
Racing pads are designed to work in specific temperature ranges so it is important to choose the desired compound for the correct environment the vehicle will be used in.
Pad Compounds are run on a brake dynamometer over multiple brake applications (stops) to test the materials in a controlled environment for the most accurate data. Wear rates and temperatures can be influenced by car setup, grip levels, track layout/configuration and many other variables.
Girodisc
MP-0984 Girodisc Mercedes AMG Four-Piston Magic Pads (Rear)
$150.00
Girodisc "Magic Pads" are the solution to your squeaky, dusty, expensive factory replacement pads. They have lower dust than typical factory pads and much less than other performance pads. You won't be cleaning your wheels nearly as often!
Additionally, they have great initial bite, something most less-expensive pads lack. But the real reason people like Magic Pads so much is they are the "silver bullet" to brake noise problems. Magic Pads are a semi-metallic composition that is easy on rotors and on your wallet.
We recommend always replacing pads as a whole car set when switching compounds. All Magic Pads come with anti-noise shields pre-installed and included in the price. When comparison shopping, be sure to note the high quality of Girodisc components.
If you have any questions, give us a call at 844-438-7244. We're happy to help!
Girodisc
MP-1291 Girodisc Mercedes AMG Six-Piston Magic Pads (Front)
$250.00
Girodisc "Magic Pads" are the solution to your squeaky, dusty, expensive factory replacement pads. They have lower dust than typical factory pads and much less than other performance pads. You won't be cleaning your wheels nearly as often!
Additionally, they have great initial bite, something most less-expensive pads lack. But the real reason people like Magic Pads so much is they are the "silver bullet" to brake noise problems. Magic Pads are a semi-metallic composition that is easy on rotors and on your wallet.
We recommend always replacing pads as a whole car set when switching compounds. All Magic Pads come with anti-noise shields pre-installed and included in the price. When comparison shopping, be sure to note the high quality of Girodisc components.
If you have any questions, give us a call at (844) 438-7244. We're happy to help!
Girodisc
A1-035 Girodisc 2pc Front Brake Rotors (340mm)
$1,200.00
FITS: Porsche 981 Boxster/Cayman (non-S, 2013-2016)
Thunderhill is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline.This Girodisc system upgrades the 325mm OEM one-piece rotors to a 340mm two-piece steel disc and aluminum hat. Machined aluminum caliper spacers are included to accommodate the larger Girodiscs. This two-piece "floating rotor" design will bolt directly to your Porsche 981 front and work flawlessly with the OEM calipers.Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response.Combined with Pagid or PFC performance brake pads and Thunderhill RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving.The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc.The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs.Sold/priced per pair.
Brembo
Brembo Brakes Front 355x32 Six Piston (M3 E46, Z4 E85 E86)
$3,995.00
Brembo Front 355x32 Rotors and Six-Piston Calipers
FITS:
BMW M3 (E46)
BMW Z4 (E85)
BMW Z4 (E86)
For Drivers Who Demand the Utmost From Their Car
Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track -ay sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium calipers with six pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware.
Solutions and Technologies Born on the Race Track
Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.
The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.
Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit.
More Braking Torque and Thermal Capacity on Track
Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track.
Eye-Catching and Unique Looks
With a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.
Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.
Brembo
Brembo Brakes Front 405x34 GT-R Six Piston (M2, M3, M4)
$9,295.00
Brembo Front 405x34 Rotors & Six-Piston Calipers
This Front Brake Kit Fits The Following Cars:
BMW M2 (F87)
BMW M3 (F80)
BMW M4 (F82)
The Most Sophisticated High Performance Braking System Ever Manufactured For Your BMW
This is a lightweight two-piece rotor and caliper system for racing, track days, and high-performance driving. The Brembo GT System combines increased thermal capacity of large 405mm discs and lightweight characteristics of 2-piece floating rotors for an extremely versatile and durable system on or off the track.
Brembo GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everyday driving and demanding track-day sessions.
Racing-Derived Monoblock Calipers in Billet Aluminium
Lightweight, rigid and resistant to high temperatures, Brembo GT-R calipers are made from billet aluminum with a radial 6-piston arrangement. Brembo GT-R calipers reduce unsprung weight, a key to improving suspension dynamics and vehicle performance.
These Brembo calipers are designed to provide constant, predictable braking strength and a stable, reliable pedal. Individual pistons with stainless steel radiators allow a significant reduction in heat transmission during extreme driving, reducing brake wear and fade to a minimum.
Brembo GT-R calipers are nickel plated to protect against corrosion, giving you extraordinary Brembo quality that lasts. The Brembo logo is CNC machined in red embossing.
Two-Piece Floating Discs Reduce Unsprung Weight and Dissipate Heat Quickly
Brembo GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly.
The floating disc uses anti-noise hardware that is the direct result of Brembo's experience with brakes designed for Formula 1 competition. Each disc is 405mm in diameter and 34mm thick.
Brembo Brake Pads Provide Optimum Performance in Various Driving Conditions
The Brembo GT-R range offers a series of friction material which is able to meet a wide range of driving types. Brembo gives you optimum braking performance in various driving conditions, both on and off the track. In addition to High Performance Street brake pads, pads with racing/track-day friction material are also available.
In order to guarantee correct installation, the GT-R kit includes all the necessary hardware, such as billet brackets and installation adaptors plus stainless steel Goodridge brake lines.
Brembo
Brembo Brakes Front 380x34 CCM-R + GT-R Six Piston (M2, M3, M4)
$19,895.00
Brembo Front 380x34 Rotors & Six-Piston Calipers
This Front Racing Brake System Fits The Following Cars:
BMW M2 (F87)
BMW M3 (F80)
BMW M4 (F82)
An Extraordinarily Sophisticated Carbon Ceramic Braking System For Your BMW
Brembo's amazing lightweight carbon ceramic 2-piece rotors are at the heart of this rotor and caliper system for racing, track days, and high-performance driving events (HPDE). The Brembo GT System performance combines superior wear (5x longer than iron), increased thermal capacity, and the extremely lightweight characteristics of CCM-R for an extremely versatile and durable system on or off the track.
Brembo's GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everyday driving and demanding track-day sessions.
The Beating Heart of a Shockingly Powerful Racing Brake System
At the heart of this Brembo kit are the monoblock aluminum calipers, machined from a single billet of aluminum to ensure outstanding rigidity and minimized deformation under heavy braking. The 2-piece floating rotors supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.
Cross-drilled finishes are designed and executed with meticulous precision. These holes in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for the M2/M3/M4, TUV/DOT homologated metal-braided hoses, plus an adapter and high-quality fastener hardware complete the kit.
Racing-Derived Monoblock Calipers in Billet Aluminium
Lightweight, rigid and resistant to high temperatures, Brembo's GT-R calipers are made from billet aluminum with a radial 6-piston arrangement. They reduce unsprung weight, improving suspension dynamics and vehicle performance.
Brembo GT-R calipers are designed to provide constant, predictable braking strength and a stable, reliable pedal. Individual pistons with stainless steel radiators allow a significant reduction in heat transmission during extreme driving, reducing brake wear and fade to a minimum.
Brembo GT-R calipers are nickel plated to give you exceptional protection against corrosion, providing longevity and maintaining the highest quality under racing conditions. The Brembo logo is CNC machined in red embossing.
Two-Piece CCM-R Rotors Reduce Weight and Dissipate Heat
Brembo GT-R braking systems include 2-piece floating discs which reduce unsprung weight and dissipate heat quickly. The floating rotor uses anti-noise hardware that is the direct result of Brembo's experience with brakes designed for Formula 1 competition. The discs are 380mm in diameter and 34mm thick.
Brembo Racing Pads Provide Optimum Performance in Various Conditions
The Brembo GT-R series offers a range of friction materials able to excel in widely differentiated of racing conditions. This allows you to dial in optimum performance both on and off the race track.
The GT-R kit includes all the necessary hardware such as billet brackets and installation adaptors, as well as stainless steel Goodridge brake lines, to guarantee a seamless installation.
Brembo GT-R/CCM-R Racing Brake Kit Details:
Caliper Body: Billet Monobloc Radial Mount
Caliper Color: Nickel Plated
Number of Pistons: 6
Disc Size and Construction: 380mm x 34mm CCM-R
Disc Type: Drilled
Disc Material: Carbon Ceramic Matrix-Race (CCM-R) / Pre-Bedded
Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring
Front or Rear System: FRONT
Goodridge Stainless Steel brake lines
Sign Up and Save
Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.
