CMS Performance
CMS Performance Harness Install Kit For C7 Corvette
from $125.00
CMS Performance Harness Install Kit For C7 Corvette
This Product Fits The Following Cars:
Chevrolet Corvette Stingray & Z51, C7 (2014-2019)
Chevrolet Corvette Z06, C7 (2015-2019)
Quick and Easy Installation of Harness Lap Belts in the C7 Corvette
The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette.
Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor.
CMS Performance is 100% Designed and Built in the USA
All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions.
For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price!
CMS Performance Harness Install Kit Details:
Manufacturer: CMS Performance
manufacturer Part: Harninstall-C7
Construction: 360o TIG welded stainless steel
Finish: Satin black powder coat
Designed, manufactured, and powder coated by CMS Performance in the USA
This product is intended for off-road use only.
CMS Performance
CMS Performance Harness Install Kit For Gen 6 Camaro
from $125.00
CMS Performance Harness Install Kit For Gen 6 Camaro
This Product Fits The Following Cars:
Chevrolet Camaro Coupe, all (2016+)
Quick, Easy Installation of Harness Lap Belts in the Gen 6 Camaro
The CMS Performance Harness Install Kit for the Gen 6 Camaro provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your Gen 6 Camaro.
Each CMS Performance Gen 6 Camaro Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor.
CMS Performance is 100% Designed and Built in the USA
All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance Gen 6 Camaro Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions.
For the Gen 6 Camaro, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the Gen 6 Camaro without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price!
CMS Performance Harness Install Kit Details:
Manufacturer: CMS Performance
manufacturer Part: Harninstall-G6C
Construction: 360o TIG welded stainless steel
Finish: Satin black powder coat
Designed, manufactured, and powder coated by CMS Performance in the USA
This product is intended for off-road use only.
Stilo
Stilo ST5 Short 90 Degree Top Air System For Maglock
$249.95
Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air 90 Degree Maglock Kit
The exclusive Stilo "Top Air System" for ST5 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the innovative 90 degree system you can now make quick air connection with your Stilo ST5. Does not come with a flow adjuster.
Air enters in through four small ventilation holes molded into the top of every ST5 helmet. Air fed into the Top Air is directed to the top of the head . Old air flows out of the side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet.
Stilo's Top Air 90 Degree Maglock System can be fitted to all Stilo ST5 model helmets.
Stilo
Stilo ST5 Short Top Air System For Maglock
$224.95
$250.00
Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air Maglock Kit
The exclusive Stilo "Top Air System" for ST5 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the new innovative Top Air outlet you can now make quick air connection with your Stilo ST5.
Does not come with a flow adjuster.
Air enters in through four small ventilation holes molded into the top of every ST5 helmet. Air fed into the Top Air is directed to the top of the head . Old air flows out of the side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet.
Stilo's Short Top Air Maglock System can be fitted to all Stilo ST5 model helmets.
Stilo
Stilo ST5 Helmet Top Air Systems For Maglock
$224.95
Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air Kit For Maglock Systems
Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone.
This Top Air is designed to be used with a Maglock System.
This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam.
There are six small ventilation holes molded into the top of every ST5 helmet. Stilo's Top Air system fits over the center four holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the top side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet.
Stilo's Top Air System can be fitted to all Stilo ST5 model helmets. It comes in two sizes to best fit your helmet:
YA0893-S Non-Adjustable for helmets XS 54cm to L 59cm
YA0894-S Non-Adjustable for helmets L+ 60cm to 4XL 64cm
Racetech
Racetech RTB1009M Aluminum Side Mount Brackets
$169.99
Racetech RT1009M Aluminum Side Mounts
Lightweight and Strong Racing Seat Side Brackets
Racetech mill-finish 5mm (5083 grade) aluminum brackets for side-mounting a racing seat. Five slots and five holes in each bracket provide plenty of height and tilt adjustment for the optimal driving position.
Sold as a pair.
Racetech RT1009M Brackets Fit the Following Seats:
RT4009, RT4009W
RT4009HR, RT4009THR, RT4009WHR, RT4009WTHR
RT4100, RT4100WT, RT4100HR, RT4100WTHR
RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR
RT4129HRW, RT4129WHR, RT4129WTHR
RT9009, RT9009HR
RT9119HR, RT9119THR, RT9119WTHR
RT9129HRW, RT9129THR, RT9129WHR, RT9129WTHRL
Racetech RT1009M Specs and Details:
Weight: 2.74 lbs (1.24 kg) per pair
Materials: 5mm 5083 aluminum alloy
Seat hole spacing: nominal 295mm; min 290mm; max 300mm
CMS Performance
CMS Performance Clubsport Roll Bar for Porsche GT3-GT3RS (992)
$3,795.00
CMS Performance Clubsport Roll Bar For Porsche 992 GT3 & GT3RS
This Roll Bar Fits The Following Cars:
Porsche GT3, 992 (2022+)
Porsche GT3RS, 992 (2023+)
New Ultimate Roll Bar for the Porsche 992 GT3 and GT3RS
The CMS Performance Clubsport Roll Bar is a new variant of our incredibly popular GT3/GT3RS roll bar. Re-designed with steel gusseting and high-strength support tubing is added to the top and bottom of the X-brace and to all four corners, the CMS Performance Clubsport Roll Bar takes rigidity and strength to another level.
This is the strongest, highest quality bolt-in roll bar on the market for the Porsche 992 GT3 and GT3RS, period. In designing and building the CMS Performance Clubsport roll bar, structural rigidity and impact protection were our primary goals. This roll bar is fully 360o TIG welded, the main tubing is 1.75" Docol R8 Advanced High-Strength Steel. CMS is the only roll bar manufacturer to employ this modern material. The support tubing is Docol R8 as well, and the gussets are machined from steel plate.
CMS Performance tailors the GT3/GT3RS Clubsport roll bar to take full advantage of the strongest chassis mounting points in the Porsche 992 GT3/GT3RS . The main roll hoop is X-braced and gusseted, with a single tube cross-bar providing lateral strength that's also used for mounting racing harness shoulder straps.
Attention To Detail Is The Hallmark Of CMS Performance
The cross-bar on the CMS Performance Clubsport Roll Bar for the Porsche 992 GT3 and GT3RS lets you attach your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) and distance relative to the driver and passenger, regardless of seat position.
The CMS Performance Clubsport Roll Bar was designed to leave your rear view unobstructed by additional bracing that other roll bars require due to the use of inferior materials.
CMS Performance also features a unique three-piece rear kicker that bolts to the Porsche 992 GT3/GT3RS rear shock towers (where the factory GT3 Cup Car roll cage mounts). These are the strongest rear mounting points, and also add rigidity to the chassis for more precise handling. This kicker design is incredibly strong while also being a breeze to install (typical one-piece designs can be a nightmare to install). The main roll hoop is mounted to your Porsche's steel frame structure beneath the vehicle just like the factory Cup Car cage.
Built Like a Tank, Finished Like a Porsche
Designed using the same guidelines as a full racing roll cage and fully 360o TIG welded by our chassis fabricators and master welders, the CMS Performance Clubsport Roll Bar for the Porsche 992 GT3 and GT3RS is unsurpassed in quality, durability, and structural integrity. Each roll bar is professionally powder-coated in-house to guarantee fit and finish no other manufacturer can match. This also lets us use powder coat colors we've matched to Porsche GT3 and GT3RS OEM paint colors for a truly customized aesthetic. We also offer custom technical powder coat finishes like the amazing Superchrome! Or you can choose our rich satin black powder coat for a more low-key installation. Powder coating any color you choose is included in the price of your CMS Performance roll bar.
Don't Settle For Anything Less Than The Best
Thoughtful engineering and design, superior materials, masterful fabrication, and beautifully customized finishing. That's the CMS Performance way of doing things. Backed by our legendary customer service, it all adds up to this: you can pay more for a roll bar, but you can only get the best from CMS.
Add Premium Racing Harnesses To Your Porsche
Add six-point Schroth Enduro 2x2 GT3, Schroth Flexi 2x2 GT3, or Sabelt Silver Series GT3 racing harness to your order and save! These harnesses are specifically designed for the Porsche 992 GT3 and GT3RS and will bolt to your factory lightweight carbon bucket seats.
Or you can add four-point Schroth Profi II ASM GT3 or Sabelt Porsche GT3 4 Point harnesses, ideal for the Porsche 992 GT3 and GT3RS passenger seat that doesn't have a factory sub-strap pass through.
With six-point harnesses, we strongly recommend using the CMS Performance Sub Strap Mount to provide a solid, properly located anchor for your anti-submarine straps. The CMS Performance Sub Strap Mount is simple to install at the same time you're installing your roll bar!
Straightforward Installation Takes The Headache Out Of Roll Bars
We've been through more than a few wrestling matches installing bolt-in roll bars in street cars. Fortunately, we used that experience to design the CMS Performance Roll Bar for the Porsche 992 GT3 and GT3RS to be a lot less frustrating to install. Check out the installation instructions here. We hesitate to go so far as to say it's easy, but we'll say it isn't hard if you have a friend and some basic tools.
CMS Performance Roll Bar Details:
Manufacturer: CMS Performance
Manufacturer Part: RB11-992
Materials: Docol R8 Advanced High-Strength Steel; steel plate gussets.
Construction: Full-penetration 360o TIG welded; one-piece gusseted main hoop and three-piece kicker; high-strength double-bolted interlocking roll bar joints and American-made Grade 8 hardware.
CNC-cut precision mounting plates
Full seat travel with any seat
Detailed installation instructions & all necessary hardware for a seamless installation
This product is intended for off-road race track use only.
Bell
Bell SE077 Mirror Helmet Shields (Fits HP77)
$179.95
Bell Racing Helmets SE077 3mm Mirrored Helmet Shield
Bell SE077 helmet shields are specifically designed for the Bell HP77 helmet. The SE077 is a 3mm, injection-molded, optically correct polycarbonate face shield with a Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE077 shield uses the Bell SV (SE07, SE077) pivot kit. It is compatible with tear offs and is available in a variety of tint colors.
Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.)
Bell SE077 Helmet Shield Tint Options:
Silver Mirror
Gold Mirror
Blue Mirror
Red Mirror
Rainbow Iridium Mirror
Bell
Bell SV (SE07, SE077) Helmet Shield Pivot Kit
$24.95
Bell Racing Helmets SV (SE07,SE077) Pivot Kit
The SV (SE07, SE077) Pivot Kit is replacement hardware for Bell helmets that use SE07 3mm, SE07 2mm, and SE077 3mm shields.
Bell recommends using a new hardware kit when replacing the helmet shield and keeping a spare pivot kit around. Available in Black or Silver.
Compatible With The Following Bell Racing Helmets:
HP77
HP7
RS7
RS7C LTWT
RS7SC LTWT
RS7 Carbon
RS7K
RS7K Carbon
KC7-CMR
KC7-CMR Carbon
Alpinestars
Alpinestars Tech-1 K YOUTH v2 Karting Shoes
$169.95
Alpinestars Tech-1 K Youth v2 Karting Shoes
The Alpinestars Tech-1 K v2 karting shoe was developed to withstand the stresses of kart racing, with a nubuck and microfiber upper for durability and support. The new anatomical design improves forefoot profiling, while an asymmetric lacing system offers a more progressive closure.
New external reinforcements on the heel and toe area and an ultra-thin Formula 1 spec sole with rounded heel give you unsurpassed levels of grip and sensitivity on the pedals.
KEY FEATURES
Innovative Alpinestars foot counter for maximum performance: an ergonomic, polypropylene heel counter provides support and stability inside the shoe, while a flatter forefoot with die-cut ribbing provides greater feel on the pedals.
Ultra-thin Formula 1 specification sole uses Alpinestars exclusive rubber compound which is strategically ribbed to provide pedal sensitivity and grip - in both wet and dry conditions.
CONSTRUCTION
Designed and developed specifically for the stresses of kart racing.
Advanced hybrid construction consisting of a durable nubuck microfiber upper with strategically positioned perforated zones for lightweight performance, excellent breathability and superior feel.
External toe reinforcements on both sides for additional abrasion resistance and protection.
Enhanced anatomical profiling for improved levels of comfort, fit and performance.
Dual asymmetric closure system incorporates adjustable ultra-thin hook-and-loop grip strap plus aramidic speed top lacing coupled with para-aramidic eyelets for durability, personalized fit and secure closure.
Collar padding constructed from Nitrile rubber for comfort and weight-saving.
Soft microfiber collar is cut lower at the rear to allow greater Achilles’ heel comfort and improved range of movement.
Tongue features perforated soft padding for comfort and improved fit.
External rear heel rubber for improved abrasion resistance and protection.
Bell
Bell SRV-1 Helmet Shield Pivot Kit
$19.95
Bell Racing Helmets SRV-1 Pivot Kit
The SRV-1 Pivot Kit is replacement hardware for helmets that use Bell 287 SRV, 288 SRV, 289 SRV, or SRV-8 shields. Bell recommends using a new hardware kit when replacing your helmet shield and keeping a spare pivot kit around. Available in Black, Silver, Red, and Blue.
Compatible With The Following Bell Racing Helmets:
M8
M8 Carbon
Sport EV
Vador
Dominator2
K1 Pro
GP2 Youth
CMS Performance
CMS Performance Sub Strap + Lap Belt Mount for BMW M2/M4/Z4
from $145.00
CMS Performance Sub Strap + Lap Belt Mount for BMW
This Mount Fits All Sub-Models of the Following Cars:
BMW F87 M2 (2016-2021)
BMW G87 M2 (2023)
BMW F82/83 M4 (2014-2020)
BMW G82/83 M4 (2021+)
BMW E89 Z4 (2009-2016)
BNMW G89 Z4 (2018+)
The Best Way to Mount Harness Lap and Sub Belts in Your BMW M2, M4, or Z4
The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory BMW seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original BMW mounting bolts.
CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace.
The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA.
CMS Performance Sub Strap + Lap Belt Mount for BMW Details:
Manufacturer: CMS Performance
Manufacturer part no.: CMS-SL-001
Construction: TIG-welded solid carbon steel
Finish: satin black powder-coat
Fitment: fits driver or passenger seat
Allows full fore/aft and up/down seat adjustment
Does not interfere with OEM seat belts or airbag hardware
CMS Performance
CMS Performance Ultimate Race Seat Mounting Kit (Porsche)
from $410.00
CMS Performance Ultimate Race Seat Mounting Kit For Porsche
This Kit Fits the Following Vehicles:
Porsche 911 Carrera, 2001-2023 (All)
Porsche Boxster, 2001-2023 (All)
Porsche Cayman, 2006-2023 (All)
Introducing Our Complete Race Seat Mounting Kit: The Ultimate Upgrade for Porsche Motorsports Enthusiasts!
Are you a Porsche racing or track-day aficionado looking to upgrade your on-track safety and performance? Look no further than the CMS Performance Ultimate Racing Seat Mounting Kit. One of the very best upgrades you can make for driving your Porsche on the race track is adding a dedicated racing seat.
CMS Performance designed this kit to give you a complete solution to installing your choice of seat in your Porsche. No mixing-and-matching, hunting for parts and wondering whether it'll all work together. The CMS Performance Ultimate Race Seat Mounting Kit has everything you need!
Precision Engineering for Porsche Excellence
The CMS Performance Ultimate Race Seat Mounting Kit is precision- engineered, tailor-made to fit a variety of race seats safely and securely in your Porsche. Crafted with meticulous attention to detail from 3/16" carbon steel, this kit draws on our many years of experience with track-prepped Porsches. Let CMS Performance help you unlock the full potential of your high-performance Porsche on the race track.
Custom Powder Coat to Match Your Porsche
The CMS Performance Ultimate Race Seat Mounting Kit comes standard in a durable black wrinkle-finish powder coat. CMS Performance can also custom powder-coat your kit in just about any Porsche OEM paint color you like. Simply choose "Custom Color" in the dropdown above and specify the Porsche color you want in your Order Notes at check-out.
CMS Performance Ultimate Race Seat Mounting Kit Includes:
Mounting base w/ integrated sub strap bar (bolts securely to factory Porsche seat mounting holes)
Two steel side-mount race seat brackets
All necessary hardware (Grade 8)
Detailed installation instructions
Optional: high-performance race seat slider
Key Features of This Kit:
Race-Ready Compatibility: Designed to seamlessly integrate with a wide range of racing seats from Sparco, OMP, Racetech and Sabelt. Our mounting kit ensures a perfect fit on the driver and/or passenger side of your Porsche. Whether you drive a 911, Cayman, or Boxster, CMS Performance has you covered.
Fully Integrated: The CMS Performance kit includes everything you need to install a racing seat in your Porsche. No mixing-and-matching, so you can spend less time installing and more time racing.
Lightweight Durability: Constructed from premium materials, our kit prioritizes strength without compromising on weight. The integrated design puts a premium on maintaining structural integrity.
Customization Options: Tailor your installation to perfection with multiple options, including racing sliders and custom powder-coat colors.
Enhanced Safety: Safety is paramount in motorsports, and our kit doesn't cut corners. It's designed to meet or exceed industry safety standards, keeping you protected during the most demanding races.
Quick and Easy Installation: The CMS Performance Racing Seat Mounting Kit is engineered for straightforward installation and precise fitment.
Not included: CMS Performance roll bar and race seats are available separately.
Seat mounting kit is shown with optional race seat slider.
CMS Performance
CMS Performance Sub Strap + Lap Belt Mount for Mustang GT350/GT350R/S550
from $145.00
CMS Performance Sub Strap + Lap Belt Mount for GT350/GT350R/S550
This Mount Fits All Variants of the Following Cars:
Ford Performance Shelby GT350 (2015-2020)
Ford Performance Shelby GT350R (2016-2020)
Ford Performance Shelby GT500 (2021+)
Ford S550 Mustang GT (2015-2023)
The Best Way to Mount Harness Lap and Sub Belts in Your Shelby Mustang
The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Ford Performance seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Ford mounting bolts.
CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace.
The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA.
CMS Performance Sub Strap + Lap Belt Mount Details:
Manufacturer: CMS Performance
Manufacturer part no.: CMS-SL-003
Construction: TIG-welded solid carbon steel
Finish: satin black powder-coat
Fitment: fits driver or passenger seat
Allows full fore/aft and up/down seat adjustment
Does not interfere with OEM seat belts or airbag hardware
CMS Performance
CMS Performance Sub Strap + Lap Belt Mount for Toyota GR Supra/GR86
from $145.00
CMS Performance Sub Strap + Lap Belt Mount for Toyota GR Supra/GR86
This Mount Fits All Variants of the Following Cars:
Toyota GR Supra A90/A91 (2019+)
Toyota GR86 (2021+)
The Best Way to Mount Harness Lap and Sub Belts in Your GR Supra or GR86
The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Toyota seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original seat mounting bolts.
CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace.
The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA.
CMS Performance Sub Strap + Lap Belt Mount Details:
Manufacturer: CMS Performance
Manufacturer part no.: CMS-SL-005
Construction: TIG-welded solid carbon steel
Finish: satin black powder-coat
Fitment: fits driver or passenger seat
Allows full fore/aft and up/down seat adjustment
Does not interfere with OEM seat belts or airbag hardware
Bell
Bell MAG Rally Helmet
$459.95
Bell MAG Rally Helmet
The Bell MAG Rally Helmet is an entry level open-face helmet in a modern design. Bell Helmets’ “Serious Head Protection” allied with ZeroNoise® high quality and powerful communication system at very affordable price, never seen before! Featuring a fiberglass shell, an adjustable peak fitted with antiglare sunscreen and a fantastic communication system, the MAG RALLY is the perfect helmet for rally drivers and co-drivers wanting an entry level and very affordable open face helmet. Thanks to its ZeroNoise® electronics, high power speakers and noise cancelling microphone, the MAG RALLY simply sets new standards in its category.
Bell MAG Rally Helmet Features:
Manufacturer: Bell Racing Helmets
Manufacturer part no.: 1435A
Homologation: FIA8859-2015 approved
Open face helmet featuring fiberglass composite shell
Adjustable sun peak with antiglare sunscreen
ZeroNoise® electronics, high power speakers, and efficient noise-cancelling microphone mounted on high-quality flex boom
Straight cable coming out of the helmet, terminated in an ultra-reliable heavy duty in-molded female Nexus connector (compatible with other brands of amplifiers)
Color: Metallic Titanium Silver
Sizes: Small, Medium, Large, X-Large
Sign Up and Save
Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.
