Chillout Systems
Chillout Systems Quantum Cooling Package
$0.00
Chillout Systems Complete Quantum Cooling Kit
This Thunderhill-exclusive kit contains everything required for a complete installation of the amazing Chillout Systems Quantum driver cooling system. Optional equipment is also available.
KIT INCLUDES:
Chillout Systems Quantum Cooler
Power Cable
Mounting Tray (choose steel or carbon fiber)
Chilllout Club Series cooling shirt
Chillout Systems Coolant Formula - 1.5 Liter
Chillout Systems 6-Foot Insulated Coolant Hose
40-Amp Inline Fuse (install within 6 inches of power source)
OPTIONAL UPGRADES:
Quantum Pro Cooler (see details below)
10-Foot Insulated Coolant Hose
Insulated Y-Hose for driver/co-driver cooling
Upgrade to Pro Touring SFI shirt
Air Duct Plenum (increases air flow & cooling capacity): Use in conjunction w/ NACA duct and hose
MUST SELECT ONE: Dual Prong Connector or Rapid Release Connector (Rapid Release includes roll bar and flush mounts, easy push-on connection, emergency pull release)
Wired remote control
Second Vehicle Kit (includes mounting tray, wiring harness, fuse and relay)
What makes the Chillout Systems Quantum Cooler superior to other driver cooling systems?
Complete control coolant temperature, not just the flow of cold liquid.
Bright, easy-to-read digital display on the cooler or control via a mountable remote control unit.
Requires 25% less space to mount, fits nearly any vehicle!
Say goodbye to the hassle and weight of ice and water; Chillout System weighs far less than any competing system.
A 1.5 liter coolant pack lasts most drivers an entire season!
With our Second Vehicle Kit, your cooler can be hot-swapped to another car in under two minutes
Quantum Pro vs Quantum V3:
The Quantum Pro offers several additional features versus the Quantum V3, including:
Full color LCD display with extensive data.
Internal bypass valve that eliminates the need for a coolant loop. System continues to cool the reservoir even when the shirt is disconnected.
Dual 4-inch 220 cfm brushless fans.
50% larger condenser vs V3.
25% larger evaporator vs V3.
LiPo / Li-ion battery support outlet at 24 volts. Supports parallel power at 12 and 24 volts simultaneously, no downtime between power sources.
Coolant reservoir has double the capacity at 13 oz.
Eco mode maintains system under 18 Amps at all times.
Carbon Fiber mounting plate, further reducing weight and heat-soak.
Two flow sensors monitor both sides of the flow valves for easy troubleshooting and maintenance.
IP65 rating.
Lifeline
Lifeline AFFF Hand Held Extinguisher
from $129.99
The Perfect Affordable Extinguisher For HPDE Cars
Ground Shipping Only. Pressurized bottles cannot be shipped via air.
For HPDE participants, there simply is no better affordable fire extinguisher to protect your valuable sports car if things go sideways at the racetrack. AFFF (Aqueous Film Forming Foam) fire extinguishers are suitable for use on Class A (wood, paper, material & cloth) & Class B (flammable liquids: gasoline, spirits, diesel, etc.) fires. This Dual Class A & B rating makes the Lifeline Foam (AFFF) Fire Extinguishers far superior for use in your HPDE car and trailer vs. the typical big-box store extinguisher.
These are NOT approved or intended for use as motorsports-sanctioned fire suppression systems.
All Lifeline hand held fire extinguishers are supplied complete with a bracket and two quick release straps for easy access.
Extinguishers are refillable and should be serviced every two years.
Choose from 1.0, 1.75, or 2.4 liter bottles.
Lifeline
Lifeline Zero 360 Novec 1230 Hand Held Extinguisher
from $319.99
Premier Portable Fire Supression Specifically For Motorsports
Ground Shipping Only. Pressurized bottles cannot be shipped via air.
This latest generation of Lifeline hand held fire extinguishers now use the highly efficient gaseous extinguishant ZERO 360 also used in Lifeline's top-of-the-line full-racing fire systems. Designed specifically for the rigors of motorsports, these extinguishers operate in any orientation.
Not the least-expensive option to strap into your HPDE car or race trailer, but considering the damage a fire can do to an HPDE-driven sports car, having a top-of-the-line extinguisher on hand is inexpensive insurance.
All Lifeline hand held fire extinguishers are supplied complete with a bracket and two quick release straps for easy access.
Extinguishers are refillable and should be serviced every two years.
Choose from 1.0, 2.0, or 3.0 kilogram bottles.
Lifeline
Zero 360 1.0 Kg Novec 1230 Belt Mounted Extinguisher
$399.99
Belt Mounted Holster For Quick Access In Pits Or Paddock
Using the same Novec 1230 technology found in Lifeline's Zero 360 hard-mounted racing fire systems, these belt mounted hand-helds are ideal for pit personnel allowing you to fight small fires quickly and safely.
The specially designed holster allows for fast, easy access but will ensure the portable extinguisher remains securely held at all other times.
All Lifeline hand held fire extinguishers are supplied complete with a bracket and two quick release straps for easy access.
Extinguishers are refillable and should be serviced every two years.
Available in 1.0 kilogram bottles.
Stilo
Stilo ST5 Helmet Top Air Systems
$127.95
$143.00
Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air Kit
Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone.
This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam.
There are four small ventilation holes molded into the top of every ST5 helmet. Stilo's Top Air system fits over the forward two holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the rear holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet.
Stilo's Top Air System can be fitted to all Stilo ST5 model helmets. It comes in two sizes to best fit your helmet:
YA0834 Non-Adjustable for helmets XS 54cm to L 59cm
YA0857 Non-Adjustable for helmets L+ 60cm to 4XL 64cm
Stilo
Stilo Intercom Systems
from $307.95
$343.00
Stilo WRC 03 Intercom System
The Stilo WRC Series Intercom Systems were designed to be securely installed on the roll bar, where it's easy to reach and convenient to adjust. They plug directly into your Stilo helmet with the included IMSA cables for clear, pitch-perfect audio while on track. The WRC Series feature an automatic On/Off switch controlled through co-driver plug connection; no more starting races disconnected.
Individual volume adjustment for each connected helmet. Nine-volt power supply standard (9V battery), with 12-volt available as option. Camera and/or radio connection is also possible with these units. The WRC-DES includes an advanced noise-canceling "extra filter" which effectively eliminates background noise to make driver/co-driver communications clearer than ever!
For more advanced communication needs, the DG-10 includues noise-cancellation as well as a Bluetooth connection for simplicity at its finest.
DG-10
Digital active noise cancellation with SDA filter
Integrated Bluetooth for mobile phone connection
Camera and radio connections
DG-30
Digital active noise cancellation with SDA filter
Separate main intercom box which can be positioned under the seats to offer a lower center of gravity
Remote control panel
GSM module integrated into the intercom box with a SIM card slot
Camera and radio connections
DG-30 Includes the following:
Main unit with GSM module integrated
remote control panel
external aerial
Sabelt
Sabelt X-Pad Racing Seat
$1,159.00
Sabelt X-Pad Racing Seat
The Sabelt X-Pad is the perfect seat for those racing Miatas, Corvettes and other cars with limited interior space who still demand the safety of a full-containment seat. The X-Pad is Sabelt’s most compact seat yet, specifically designed to fit in smaller cockpits where drivers want the additional security of a full-containment / halo seat. Sabelt has managed to do this while keeping the interior seat dimensions able to fit most average racing drivers.
Sabelt has achieved the interior fit of the seat by replacing bulky seat padding with a significantly thinner, but still comfortable, foam padding. Exterior dimensions of the seat were reduced by changing key elements such as eliminating the "rolled" upper edges of the seat, which reduces the width significantly without narrowing the seat to the point where it would only fit small drivers.
The Sabelt X-Pad is a prime example of how game-changing innovation can be discovered in plain-sight; it doesn't always require a shake-up to standard conventions.
FEATURES:
FIA8855-1999 homologation.
Weight: 19.3 lbs (8.75 kg).
Standard side mounting.
Perfect full-containment seat for small cockpit cars (Miata, Corvette, etc.)
Shoulders and hips designed for Regulation 8862 to improve driver safety.
Rear structural reinforcement.
Girodisc
A2-130 Girodisc 2pc Rear Brake Rotors (Audi B8 S4-S5)
$950.00
A2-130 Girodisc 2pc Rear Brake Rotors (Audi B8 S4/S5)
Thunderhill is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The Girodisc system is a direct replacement for the OE disc, no modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx 13.9lbs vs. 17.1lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
Sold/Priced per pair.
Hans
Stilo HANS Zero Head Restraint
$1,451.95
$1,614.00
Stilo HANS Zero Head Restraints
The Stilo HANS Zero combines the best of the Simpson's HANS development group with a fresh Italian design engineered in partnership with Italian helmet manufacturer Stilo. The result is the absolute extreme in weight saving along with HANS proven safety technology to create the lightest, most comfortable HANS Device ever.
Using proprietary techniques and aerospace grade carbon fiber, the Stilo HANS Zero is 15% lighter than the HANS Ultra Lite (now the next-lightest HANS on the market). SFI 38.1 certified and FIA 8858 approved. Made in America.
NOTE: 30o Layback, size Medium only (which we've tested and works in both open and closed cars). Give Thunderhill a call at (844) 438-7244 for more details.
AiM Sports
AiM Sports 22-Pin Dash Harness
$399.95
AiM 22-Pin Dash Harness
This 90° harness plugs into the 22-pin connector on either the AiM MXP, MXL2, MXM, MXG, MXS dash, and AiM EVO5 Logger. Several of the advanced functions rely on this harness, which is not included with the standard kit.
AiM 22 Pin Auxiliary Harness for MXP, MXG, MXS, MXL2 Dashes Details:
Manufacturer: AiM
Manufacturer part number: V02573020
Alternate part number: MC-249
Harness Angle: 90°
The AiM 22 Pin Auxiliary Harness will provide access to the following functions:
Analog sensor channels 5, 6, 7, 8
Digital wheel speed sensor inputs 2, 3, 4
Digital 12v outputs 1, 2
RS232 ECU connection
The factory harness that comes with the AiM MXG, MXS, MXL2 allows only 4 inputs. If you would like more inputs then this is your harnessFor use with AiM MXS, MXP, MXL2, MXG, and EVO5 Dash/Loggers. Not compatible with older AiM MXL Pro / MXL Pro05 or AiM EVO series.
AiM 22 Pin Auxiliary Harness for MXP, MXG, MXS, MXL2 Dashes Primary use:
Adding analog sensors greater than 4. Your factory harness will allow up to 4 analog channels (sensors), this may be (1) Water Temperature, (2) Oil Temperature, (3) Oil Pressure and (4) Brake Pressure. Using the AiM 22 Pin Auxiliary harness you now can add four more analog channels (sensors) like (5) Steering Angle, (6) Throttle Position, (7) Gear Box Temperature, and (8) Differential Temp. Another way we see this cable used is independent shock travel (all corners) or engine oil temperature pre-cooler and oil temperature post-cooler.
AiM Sports
AiM SmartyCam 7-Pin to 5-Pin CAN Cable with Microphone Jack, 4M
$68.00
AiM Patch Cables With 3.5mm Microphone Input
The original AiM SmartyCam (2009-2013) and new SmartyCam HD V 2 / SmartyCam HD GP all have an internal microphone for great racing sound, but it does limit your sound options. This special cable has a 3.5mm mono jack for an external microphone. The input from this jack automatically mixes with the sound from the SmartyCam internal microphone.
SmartyCam Microphone Cable Fitment
Original SmartyCam (2009-13, with the viewing screen on top) Exp port to AiM dash/logger or SMC Bridge
SmartyCam HD "Rev 2" or later (2015+) Exp port to AiM dash/logger or SMC Bridge
SmartyCam HD GP "Rev 2.1" or earlier (to 2018) Exp port to AiM dash/logger or SMC Bridge
AiM SmartyCam CAN Cable with Microphone Jack, 4M Details:
Manufacturer: AiM
Manufacturer part number: V02566300
Alternate part number: MC-552
Dash, Solo DL, Solo 2 DL End: 5 Pin Male 712
SmartyCam End: 7 Pin Male 712
Microphone jack: 3.5mm female mono
Cable length: 4M (13 feet)
Length from 7 pin 712 to "Y" Adapter: 50mm
Length from Y adapter to 5 pin 712" 4 Meter
Length from Y adapter to microphone 3.5mm female jack: 900mm
The 7-pin 712-type connector plugs into the CAN port on the original AiM SmartyCam. A 5-pin connector on the other end connects your SmartyCam to your AiM data logger, SMC Bridge, etc. Measures 4M (13 feet) long. 3.5mm mono microphone jack is attached to the lead. This cable is not compatible with the SmartyCam HD, which has a 5-pin plug.
Stand21
Stand21 Porsche Motorsport Daytona II Racing Shoe
$365.00
Porsche Motorsport Daytona II Racing Shoe
Officially Licensed Porsche Motorsport Gear
FEATURES
Premium suede leather for high quality and durability
Reinforced stiffer heel
Shock-absorbing heel
Ergonomic and tailored-sole to offer the perfect feeling
Extra velcro-fastening strap offers firm hold by lacing up to ankle
FIA 8856-2000 and SFI 3.3/5 homologated
EU sizes from 40 to 47
Stand21
Stand21 Porsche Motorsport La Couture HSC Driver Suit
$3,550.00
Stand21 Porsche Motorsports La Couture HSC Driver Suit
This Driver Suit is a special-order item and may take two to three weeks to ship. Returns are not accepted for special-order suits. Please call us with sizing questions.
Officially-licensed Porsche Motorsports safety gear from Stand21 is now available at Thunderhill. The Stand21 La Couture HSC combines top-tier technologies in fire resistance and comfort to create a lightweight, breathable and comfortable racing driver suit designed specifically for the Porsche Motorsport enthusiast.
Stand21 Porsche Motorsports La Couture HSC Driver Suit Features:
FIA 8856-2000 homologated.
SFI 3.2A Level 5 homologated. SFI patch is an additional fee, please call us at (844) 438-7244 for details.
Dual-layer construction of exclusive stretchable and breathable Stand 21 pAIRformance® fabric.
Ample stretch panels in multiple areas for supreme comfort.
Aramid stretchable sleeve gussets.
Pre-formed sleeves for comfort while in the driving position.
Available in men's and women's sizing (see chart below).
Stand21
Stand21 Porsche Motorsport La Couture Hybrid Driver Suit
$3,550.00
Stand21 Porsche Motorsports La Couture Hybrid Driver Suit
These Driver Suits are special-order and may take two to three weeks to ship. Returns are not accepted for special-order suits. Please call us with sizing questions.
Officially-licensed Porsche Motorsports safety gear is now available at Thunderhill. The La Couture Hybrid Driver Suit combines top-tier technologies in fire resistance and comfort to produce the perfect balance between incredibly light weight and extreme breathability. Every detail of this spectacular suit was tailored specifically to the Porsche Motorsports enthusiast.
FEATURES:
FIA 8856-2000 homologated.
SFI 3.2A Level 5 homologated. SFI patch is an additional fee, please call us at (844) 438-7244 for details.
Dual-layer construction of exclusive stretchable and breathable Stand 21 pAIRformance® fabric.
Ample stretch panels in multiple areas for supreme comfort.
Aramid stretchable sleeve gussets.
Pre-formed sleeves for comfort while in the driving position.
Available in men's and women's sizing (see chart below).
Stand21
Stand21 Porsche Motorsport ST3000 HSC Driver Suit
$3,150.00
Stand21 Porsche Motorsports ST3000 HSC Driver Suit
These Driver Suits are special-order and may take two to three weeks to ship. Returns are not accepted for special-order suits. Please call us with sizing questions.
Officially-licensed Porsche Motorsports safety gear is now available at Thunderhill. The ST3000 HSC offers extreme breathability specifically for the Porsche Motorsport enthusiast. This suit is recommended for professionals and gentlemen drivers who are in their cars for periods longer than a standard sprint race (25-30 mins).
FEATURES:
FIA 8856-2000 homologated.
SFI 3.2A Level 5 homologated. SFI patch additional fee, please call (844) 438-7244.
Dual-layer construction of exclusive stretchable and breathable Stand 21 pAIRformance® fabric.
Tailored pockets.
Soft and comfortable collar.
Fully-floating pre-formed sleeves for comfort while in the driving position.
Stand21
Stand21 Porsche Motorsport ST221 HSC Evo Driver Suit
$2,800.00
Stand21 Porsche Motorsports ST221 HSC Evo Driver Suit
These Driver Suits are special-order and may take two to three weeks to ship. Returns are not accepted for special-order suits. Please call us with sizing questions.
Officially-licensed Porsche Motorsports safety gear is now available at Thunderhill. The ST221 HSC Evo offers body-heat transfererence for the Porsche Motorsport enthusiast.
FEATURES:
FIA 8856-2000 homologated.
SFI 3.2A Level 5 homologated. SFI patch additional fee, please call (844) 438-7244.
Dual-layer construction.
Lumbar stretch panel for comfort in the racing position.
Tailored pockets.
Soft and comfortable collar.
Fully-floating pre-formed sleeves for comfort while in the driving position.
Sign Up and Save
Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.
