All

Girodisc A1-034 Girodisc 2pc Front Brake Rotors (Audi S4/S5 2009-16) $1,400.00

FITS: Audi B8 S4/S5 Audi B8 A4/S4/S5 (w/ four-piston Brembo 3.0T Q5 caliper) Thunderhill is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline.This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece "floating rotor" design will bolt directly to your Audi front and work flawlessly with the OEM calipers.Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response.Combined with Pagid or PFC performance brake pads and Thunderhill RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving.The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc.The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs.Sold/priced per pair.

Girodisc A2-145 Girodisc 2pc Rear Brake Rotors (C7 Corvette Z06 w-Z07 CCM) $1,400.00

The A2-145 Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination as a direct replacement for the C7 Z07's rear carbon-ceramic brake discs. The Girodisc system bolts right up and work flawlessly with the stock rear calipers and parking brake system. We recommend using the Raybestos ST43 or Pagid 2487 racing brake pads with these Girodisc rotors. Upgrading your brakes with these lightweight, high-performance replacements is an excellent solution to the expensive, fragile ceramic brakes on the C7 Corvette Z06 w/Z07 package. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured in the US from cast iron, made to the same specification with the same material used by professional racing organizations. The rotor's curved-vane design was developed in racing as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system of high strength alloy steel drive pins, manufactured by Girodisc in the US to their own specifications and cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance. Sold/priced per pair.

Girodisc A1-145 Girodisc 2pc Front Brake Rotors (C7 Corvette Z06 w-Z07 CCM) $1,400.00

The A1-145 Girodisc system is a two-piece steel rotor and aluminum hat combination that directly replaces the fragile and expensive front ceramic brake discs on the C7 Z07. A different brake pad with an annulus -- pad swept area -- of 66mm or less must be used. This is done to keep the rotor weight as low as possible. We recommend using the Cobalt C7 Z07 racing brake pads with this system. Upgrading your brakes with these lightweight, high-performance replacements is an excellent solution to the expensive, fragile ceramic rotors on the C7 Corvette Z06 w/Z07 package. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured in the US from cast iron, made to the same specification with the same material used by professional racing organizations. The rotor's curved-vane design was developed in racing as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system of high strength alloy steel drive pins, manufactured by Girodisc in the US to their own specifications and cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance. Sold/priced per pair.

Girodisc A1-043 Girodisc 2pc Front Brake Rotors $1,400.00

FITS: Ford GT (2005-06) Thunderhill is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline.This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece "floating rotor" design will bolt directly to your Ford GT front and work flawlessly with the OEM calipers.Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response.Combined with Pagid or PFC performance brake pads and Thunderhill RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving.The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc.The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs.Sold/priced per pair.

Girodisc A2-043 Girodisc 2pc Rear Brake Rotors $1,400.00

FITMENT (REAR): Ford GT Thunderhill is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. This Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination as a direct replacement for the OEM brake discs. The Girodisc floating rotors will bolt directly to your Mustang and work flawlessly with OEM calipers. By upgrading your brakes with these lightweight high-performance replacements, as opposed to a big brake kit, your factory bias is maintained as well as your ABS effectiveness and efficiency. These 20-lb. Girodisc rotors are lighter than OEM pieces, resulting in a reduction in rotational and unsprung weight allowing for quicker acceleration, stronger braking, and faster suspension response. When used with Pagid or PFC performance brake pads, and Thunderhill RF-1 brake fluid, you have the best possible solution to overheating, cracking, and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/priced per pair.

Girodisc A2-148 Girodisc 2pc Rear Brake Rotors $1,400.00

FITMENT (REAR): Mercedes GTS Mercedes S63 Thunderhill is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most Girodisc systems the same or next business day to ensure we meet your delivery deadline. No modifications are necessary, the Girodisc rotors will bolt directly to your Mercedes Benz and work with the original calipers without issue. We recommend Pagid racing brake pads for this Girodisc system, in either RS29 (endurance) or RS14 (sprint) compound. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is made from cast iron to the same specification and material as used by professional racing organizations. It is a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.Once the Girodisc system is in place, simply replace the cast iron rotor when needed. When used with Pagid pads and high-temp racing brake fluid, you have a truly amazing, race-proven solution for your Mercedes Benz.

Girodisc A1-172 Girodisc 2pc Front Brake Rotors (Camaro Z28) $1,400.00

Thunderhill is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits 5th Gen Camaro Z28 with OEM CCM Rotors (Conversion to Iron) The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Thunderhill RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Girodisc A2-172 Girodisc 2pc Rear Brake Rotors (Camaro Z28) $1,400.00

Thunderhill is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits 5th Gen Camaro Z28 with OEM CCM Rotors (Conversion to Iron) The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Thunderhill RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Girodisc A1-220 2 piece floating rotors for the BMW M2 M3 and M4 racing rotors replace OEM rotors for track days.

Girodisc A1-220 Girodisc 2pc Front Brake Rotors (BMW F8x M2, M3, M4) $1,400.00

Girodisc A1-220 Two Piece Floating Front Racing Brake Rotors Girodisc Rotors to Replace the Front Rotors on the Following Cars: BMW F80 M3 including CS with optional carbon ceramic brake package (gold calipers) BMW F82 M4 including CS with optional carbon ceramic brake package (gold calipers) BMW F87 M2, M2 Competition & M2 CS with red or silver calipers BMW F87 M2 CS with optional carbon ceramic brake package (gold calipers) High Performance Brake Rotors to Replace Your Fragile BMW Rotors Whether you have a BMW M2 with red or silver calipers and drilled rotors or a BMW M2, M3, or M4 with gold calipers and the OEM CCB, this Girodisc floating iron rotor system is a direct replacement for your BMW front rotors. No modifications to your car are necessary. The 400mm diameter rotors will bolt directly to your BMW and work with the original red, silver, or gold calipers (depending on your model) perfectly. By upgrading your BMW CCB brakes with lightweight high performance iron replacements, your factory bias is maintained as well as your ABS efficiency. The central hat section of the Girodisc rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from Girodisc's proprietary American-made cast iron and machined from start to finish in house at Girodisc. The disc utilizes a curved vane design, developed in racing to act as a centrifugal pump forcing cooling air through the disc. The disc and hat are joined by a floating mount system using 12 high-strength alloy steel drive pins manufactured by Girodisc in the USA and cadmium plated for long-lasting corrosion resistance. The drive pins bear the braking load while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side, allowing the rotor to grow with heat expansion while eliminating the rattle typically associated with floating rotors. A floating rotor will also self-center between the pads. Once your Girodisc system is in place, you can simply replace the cast iron discs as needed. Sold/priced per pair.

Girodisc A1-216 Girodisc 2pc Rear Brake Rotors (Audi B9 RS5) $1,400.00

Thunderhill is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Audi B9 RS5 The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Thunderhill RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Girodisc A2-184 Girodisc 2pc Rear Brake Rotors (C6 ZR1) $1,400.00

Thunderhill is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Chevrolet C6 ZR1 The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Thunderhill RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Girodisc A2-232 Girodisc 2pc Rear Brake Rotors (all R35) $1,400.00

Thunderhill is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most Girodisc products the same or next business day to ensure we meet your delivery deadline. Fits Nissan GT-R (R35, 2007+) The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. These Girodisc rear rotors are approx 18.8 lbs. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. The central hat section of the Girodisc rotor is made from strictly USA-sourced 6061-T6 aircraft specification aluminum. The disc is made from Girodisc's own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved-vane design, developed in racing to act as a centrifugal pump forcing cool air through the disc. The disc and hat have a floating mount system, which utilizes 12 high-strength alloy steel drive pins, manufactured in the US by Girodisc and cadmium plated for long-lasting corrosion resistance. These pins take the loads from braking while maintaining the axial and radial float between the hat and disc. They are secured by class 12.9 cap screws and hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise springs on the disc side, allowing the iron disc to expand as it heats up while eliminating the rattle and noise commonly associated with floating rotors. This float also allows the rotor to self center between the brake pads. Once the Girodisc system is in place, you simply replace the cast iron discs when needed. This reduces cost over time by allowing you to re-use the aluminum central hats. Sold/priced per pair

-31% sale

Sparco Sparco Circuit Carbon Fiber Racing Seats (Circuit II QRT) - Large 2028 $1,399.00 $1,999.00

Sparco Circuit Carbon Fiber Racing Seats (Circuit II QRT) - Large Hey Speed Demons and Track Day Titans! Get ready to buckle up in the Sparco Circuit Carbon Fiber Racing Seat (Circuit II QRT), where cutting-edge technology meets the thrill of the race. This isn't just a seat; it's your throne as you conquer the track! Why It's Not Just a Seat, It's a Game-Changer: Ultralight Pre-Preg Carbon Fiber Shell: Imagine strapping into a seat so light yet so strong, it feels like it's from the future. Thanks to aerospace-grade carbon fiber, this seat is like wearing a feather - if the feather was also indestructible. Wider is Better: The Circuit II Carbon is the Arnold Schwarzenegger of racing seats - a wider version of its sibling, ensuring that even the burliest racers up to a 36” waist fit comfortably. Safety First, But Make It Stylish: With integrated bolsters for head protection and compatibility with FHR devices, it's like having a personal bodyguard, but way cooler. Feel the Grip: High grip material in strategic places means you're glued in place, even if you're pulling Gs like you're in a fighter jet. Fire-Resistant Fabric: Because the only thing that should be on fire is your lap time. Special Non-Slip Fabric: It's like the seat is giving you a reassuring hug, saying, "I got you," as you take those corners at breakneck speeds. FIA 8859-1999 Approved: This seat doesn't just meet standards; it laps them. QRT Technology - Because Weight Matters: Developed in Sparco's top-secret Italian lab (probably next to a gelato shop), QRT technology is like alchemy for seats. It magically reduces weight by up to 30% compared to others. Lighter seat, faster you! Feel the Experience: Imagine sliding into this seat. You're not just sitting; you're being cradled by cutting-edge technology. As you grip the wheel, the non-slip fabric grips you back. You're one with the car. Each turn, each lap, you're not just driving; you're performing a high-speed ballet, and the Circuit II QRT is your dance partner. Specifications: Ultralight Pre-Preg Carbon Fiber Shell Excellent Ergonomics for Comfort and Control Fire-Retardant Fabric for Safety Special Non-Slip Fabric for Extra Grip FIA 8859-1999 Certification for Peace of Mind Large Size: Up to a 36” Waist Ready to Ride? Don't just dream about the perfect race. Live it. The Sparco Circuit Carbon Fiber Racing Seat (Circuit II QRT) is waiting for you. It's not just a seat; it's your ticket to an exhilarating racing experience.

Add to cart

Aim SmartyCam 3 Corsa capturing high-speed racing action.

AiM Sports AiM SmartyCam 3 Corsa $1,399.00

AiM Sports SmartyCam 3 Corsa Introducing the upgraded SmartyCam 3 Corsa, the newest iteration of the AiM SmartyCam HD. This enhanced version takes the well-known design to new heights, featuring an improved Global Shutter and the ability to capture video at up to 60 frames per second. Unlike conventional action cameras that cater to various extreme activities like skydiving or riding monstrous waves, the SmartyCam HD is meticulously crafted by dedicated motorsports enthusiasts who live and breathe the racetrack. Its narrow angle lens is specifically tailored for seamless mounting in sedans and sports cars, neatly fitting within the A-pillars for optimal placement. The new SmartyCam 3 Corsa camera has been designed for motorsport with a single purpose. Get The Best Motorsports Videos With Amazing Data Overlays The AiM SmartyCam 3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU. The Motorsports Camera With A Full Data Logger Built In All data received by the AiM SmartyCam 3 Corsa from both the CAN bus and its own internal sensors are recorded in mp4 files produced at the end of your stint or session. Your SD (or Micro SD) card contains all the information you need for a deep data analysis. (SD and Micro SD cards sold separately.) The video of a whole session, once downloaded on your PC, can now be split with a simple click into individual videos of each lap. So now you can simultaneously watch two side-by-side to see where you were faster or slower. The same operation can be performed with a SmartyCam 3 Sport video recorded on the same track. You'll be able to compare your best lap with other drivers, other set-ups, and so on! The Only HD Camera Built for the Punishment of Motorsports An on-board or in-car camera designed for motorsport must guarantee great resilience and reliability in the extreme working conditions typical of racing, and against the most adverse weather. That's why the AiM SmartyCam 3 Corsa is IP65 waterproof. Constructed from machinery-molded aluminum, PA fiberglass reinforced and featuring a sapphire frontal lens glass, the SmartyCam 3 Corsa is built like a tank. The Convenience and Ease of Auto Stop and Start You have other things to think about while you're at the race track, and the AiM SmartyCam 3 Corsa is designed with that in mind. That's why it switches on and off automatically, as well as starting and stopping recording in the same way. No Video Wave Effect with the Motorsports CMOS Global Shutter At speed on the race track, chassis vibration, engine rumble, and wind buffeting cause vibrations that are a big problem for generic sports video cameras. The AiM SmartyCam 3 Corsa is designed and built specifically to handle that environment, so you'll never experience that seasick “wave effect” you get in videos recorded by generic cameras. Ultra High-Quality Vide with Small File Sizes Generic HD cameras are absorbed with having the highest pixel count. The result is that their video files are huge, eating up memory and processing power. AiM SmartyCam 3 Corsa videos, on the other hand, have the same high video quality as other HD cameras, but their files are smaller because the H.264 compression system parameters have been optimized to perfectly balance video quality and file size. AiM SmartyCam 3 Corsa Details: Video format: H.264 compression; 1,920x1,080 pixels @ 60 fps Display resolution: 128x128 px Lens: low distortion, sapphire front glass CMOS sensor: global shutter Field-of-view: 67º or 84º Internal battery: rechargeable lithium External power: 9V to 15V Supported Micro-SD card: up to 2 TB (not included) Connectors: three Binder 712 female connectors; one USB-C Operating temperatures: -10°C to 50°C (14ºF to 122ºF) Auto power on: yes Auto power off: yes Auto start/stop: yes Camera body: coated aluminum Dimensions: 102.2 x 63 x 46.5 mm (4 x 2.5 x 1.8 in) Weight (w/ battery): 280 g (0.62 lb) Waterproof: IP65

Add to cart

-34% sale

Sparco Sparco Prime LT Driver Suit - Limited Edition $1,395.00 $2,100.00

Sparco Prime LT Driver Suit Limited Edition The Prime LT is a limited edition suit available only for the US market. The Prime LT features an all-new design in two colorways. This is a limited edition suit, only available for 2021 (while supplies last). The Prime LT is the same suit material developed for the Mclaren F1 team and is one of the lightest FIA approved racing suit in the world. The Prime LT has unparalleled technological features created in the Sparco R&D laboratories. The project involved optimizing every single detail in terms of material and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, the neck and shoulder pads were further reduced, thinner thread was used and the stitching flattened even more. The Prime LT features a 3 layer construction of proprietary Sparco technology. The third outer layer is a double faced mesh made from original DuPont Nomex Comfort woven using the Kompact system. The material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability. The suit weighs from 240 to 270 gr per square meter (depending on size). TECHNOLOGY Lightest FIA approved suit in the world Exclusive DuPont Nomex fibers provide superior fire protection and comfort Pre-curved Arms and Legs Lightweight zipper and collar Breathable stretch panels FIA approved

Add to cart

Sold out -31% sale

Sparco Sparco Prime SP-16.1 Driver Suit $1,395.00 $1,999.00

Sparco Prime SP-16.1 Driver Suit SAVE $$$ The Prime SP-16.1 suit was made in collaboration with the Mclaren F1 team and is the lightest FIA approved racing suit in the world. The Prime SP-16.1 has unparalleled technological features created in the Sparco R&D laboratories. The project involved optimizing every single detail in terms of material and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, the neck and shoulder pads were further reduced, thinner thread was used and stitching flattened even more. The Prime SP-16.1 features a 3 layer construction of some of the some proprietary Sparco technology. The third outer layer is a double faced mesh made from original DuPont Nomex Comfort woven using Kompact system. The material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability TECHNOLOGY: Lightest FIA approved suit in the world The suit weighs only 240/270 gr per square meter. Exclusive DuPont Nomex fibers provide superior fire protection and comfort Pre-curved Arms and Legs Strategic Stretch panels Seamless arm and leg cuffs Available in white or black Available in sizes 48-66 FIA 8856-2000 Approved.

Find anything you need

Sign Up and Save